Changing The Print Server Settings Using The Control Panel Network Menu (For Hl-5270Dn); Control Panel Network Menu And Default Factory Settings - Brother HL-5250DN series Network User's Manual

Changing the print server settings using the control panel
NETWORK menu (for HL-5270DN)
Before using your Brother printer in a network environment you need to configure the correct TCP/IP settings.
For more information, see Changing the print server settings on page 2-5.
In this section, you will learn how to configure the network settings using the control panel, located on the top
of the printer.
The NETWORK menu selections of the control panel allow you to set up the Brother printer for your network
cofiguration. Press any of the Menu buttons (+, -, Set or Back), and press the + or - button to move forward
or backward through the menus until NETWORK is displayed. Press the Set button to move to the next menu
level. Press the + or - button to proceed to the menu selection you wish to configure.
Please note that the printer is supplied with the BRAdmin Professional utility for Windows
®
utility for Mac OS X 10.2.4 or greater and HTTP protocol (web based management) for Windows
®
Macintosh , which also can be used to configure many aspects of the network. See Changing the print server
settings on page 2-5 for Windows

Control panel NETWORK menu and default factory settings

Level one Level two
NETWORK TCP/IP
NETBIOS/IP
ENET
FACTORY RESET
1. On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to
automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot
server cannot be found an APIPA IP address will be allocated, such as 169.254.[001-254].[000-255]. If the
'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the
machine's control panel.
®
and Changing the print server settings on page 6-3 for Macintosh
Level three Options 1
TCP/IP ENABLE =ON / OFF
IP ADDRESS= [000-255].[000-255].[000-255].
[000-255]
SUBNET MASK= [000-255].[000-255].[000-255].
[000-255]
GATEWAY= [000-255].[000-255].[000-255].
[000-255]
IP BOOT TRIES =#
IP METHOD =AUTO, STATIC, RARP,
BOOTP, DHCP
APIPA =ON / OFF
IPV6 =ON / OFF
=ON / OFF -
=AUTO, 100B-FD, -
100B-HD, 10B-FD,
10B-HD
- -
Control panel setup
®
, BRAdmin Light
®
and
®
.
Factory settings
=ON
1
000.000.000.000
1
000.000.000.000
000.000.000.000
=3
=AUTO
=ON
=OFF
=ON
=AUTO
-
7
7 - 2