Advertisement
Quick Links
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.1.
ELECTRICAL SAFETY. F
Electricity At Work Act 1989
Health & Safety at Work Act 1974
Important:
a) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.
b) Connect the BROWN live wire to live terminal ‘L’.
c) Connect the BLUE neutral wire to the neutral terminal ‘N’.
After wiring, check there are no bare wires, that all wires have been correctly connected and that the wire restraint is tight.
Cable extension reels
1.2.
General Safety
F WARNING!
!
!
!
!
!
!
!
!
!
!
!
!
!
%
%
%
%
%
%
%
%
%
!
p
WARNING! It is the user’s responsibility to read, understand and comply with the following:
p
You must
If in doubt about electrical safety, contact a qualified electrician.
subject to 1.1.10. below)
Ensure the unit is correctly earthed via a three-pin plug.
To re-wire, connect the brown & blue wires as indicated above. DO NOT connect the brown or blue to the earth terminal.
Use genuine parts only. Non authorised parts may be dangerous and will invalidate the warranty.
HOLLOW CHISEL MORTISER
SM94/C
Blue
Neutral
wire
THIS PRODUCT MUST BE FITTED
Yellow & Green
Earth wire
Brown
Live
wire
Wire
restraint
FUSE RATING
5 Amp FUSE
WITH A:
Advertisement
Related Manuals for Sealey SM94/C
Summary of Contents for Sealey SM94/C
- Page 1 HOLLOW CHISEL MORTISER SM94/C IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
- Page 2 2. APPLICATION & SPECIFICATIONS 3. CONTENT & ASSEMBLY 3.1. CONTENTS fig 1 3.2. ASSEMBLY WARNING! fig 2 fig 3 fig 4 fig 5 fig 6 WARNING! fig 7 4. INSERTING CHISEL & DRILL BIT WARNING!
- Page 3 WARNING! fig 7a 5. CONTROLS AND ADJUSTMENTS fig 8 WARNING! 5.1. Raising and lowering the head. Back Rest 5.3. Clamp adjustment 5.4. Parallel chisel adjustment. fig 9 fig 10 fig 12 fig 11 6. OPERATING INSTRUCTIONS WARNING! fig 13...
- Page 4 Declaration of Conformity Hollow Chisel Mortiser Model SM94/C For Jack Sealey Ltd. Sole importer into the UK of Sealey Quality Machinery. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.