Setting Fax Storage; Backup Print - Brother IntelliFAX 1270E Owner's Manual

4
If your pager requires a PIN, enter the
PIN, press #, press Redial/Pause, enter
your machine telephone number
followed by # #, and then press Menu/Set.
For example, 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
—OR—
If you do not need a PIN, press Redial/Pause, enter the fax number of your
machine followed by # #, and then press Menu/Set.
For example, Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
5
Press Stop/Exit.
You cannot change a Paging number or PIN remotely.
Press Redial/Pause for each 3.5 second delay, as needed.
Note

Setting Fax Storage

If you set Fax Storage to ON, you will be able to retrieve fax messages from
another location using Fax Forwarding, Paging, or Remote Retrieval.
The LCD will indicate when you have a fax stored in memory.
1
Press Menu/Set, 8, 2. The LCD
prompts you to choose a fax setting.
2
Press or to select
3
Press Stop/Exit.
If there are faxes in memory when you
turn the Fax Storage OFF, the LCD
prompts you to erase any faxes in
memory.
If you press 1, all fax data is erased and Fax Storage is turned off. If you press
2, data is not erased and Fax Storage remains on.
(See Printing a Fax in Memory, page 5-7.)

Backup Print

If you have set
faxes as they are received into memory, This is a safety feature in ease the power
goes out so you won't lose your messages.
(or OFF), and then press Menu/Set.
ON
FAX STORAGE to ON, your machine automatically prints
R E M O T E F A X O P T I O N S
9 - 2