Using The Intercom - Philips Aleor 300 Manual

Using the intercom

This function can only be used with a multi-handset configuration. It allows you to
make free internal calls and transfer external calls from one handset to another.
F Internal call
short press to call all the handsets in idle mode.
long press, enter the handset number (1 to 4) to call the selected
handset in idle mode.
* If the handset does not belong to the Aleor 300 range, this function may not
be available.
Press or
F Fast call transfer
During a call in progress you can transfer the call without waiting for the
other handset to pick up :
All the handsets ring.
F Call transfer to a specific handset
During a call in progress you transfer the call to a specific handset :
Long press on
Paging
This feature allows you to locate the handset(s).
Press on the base station. Press any key on the handset to stop
ringing once relocated or press
8
to answer or hang up the internal call.
enter the handset number (1 to 4)
.
again.
Intercom &
call transfer is
only possible
with handsets*
registered to
the same base
station.
During
transfer, the
person on hold
will hear music.
4 handsets can
be registered
to the same
base station.
All the
subscribed
handsets ring.