Table of Contents
Advertisement
Temperature
inside is too
warm
Temperature
inside is too cold
Doors can't be
closed easily
Water drips on
the floor
The light is not
working
You may have left the doors open too long or opened too
frequently; or the doors are kept open by some obstacle; or
the appliance is located with insufficient clearance at the
sides, back and top
Increase the temperature by following the "Display controls"
chapter.
Check whether the top of the refrigerator is tilted back by
10-15mm to allow the doors to self-close, or if something
inside is preventing the doors from closing.
The water pan (located at the rear bottom of the cabinet) may
not be properly levelled, or the draining spout (located
underneath the top of the compressor depot) may not be
properly positioned to direct water into this pan, or the water
spout is blocked. You may need to pull the refrigerator away
from the wall to check the pan and spout.
The LED light may be damaged. Refer how to replace LED
lights in the cleaning and care chapter.
The control system has disabled the lights due to the door
being kept open for too long, close and reopen the door to
reactivate the lights.
Advertisement
Table of Contents
