Download Print this page

Troubleshooting - Brother NC-8100h Quick Network Setup Manual

Print/fax server

Hide thumbs Also See for NC-8100h:

How to refer to the User's Guide

The NC-8100h User's Guide can be viewed from the CD-ROM supplied with your MFC in PDF.

Insert the CD-ROM into your CD-ROM Drive.

The installation screen will automatically load.

If possible, select the model name that you use.

Select On-Line Documentation.

Select the optional NC-8100h User Guide.

Troubleshooting

Make sure that your MFC is powered on and is On Line and in Ready mode.

Press the Test button. Then the current settings of the NC-8100h are printed.

Verify that the cabling and Network connections are good. If possible, try connecting the machine to a differ-

ent port on your hub using a different cable.

Check to see if there is any LED activity. The NC-8100h has a two color LED for diagnosing problems.

LED

• Orange LED: This LED will flash Orange when connected to a 100Base-TX Network and is receiving data.

• Green LED: This LED will flash Green when connected to a 10Base-TX Network and is receiving data.

• No light: This LED will be off when there is no connection to the network and no data is being received.

Note

If there is a valid connection to the network, the LED will blink orange or green.

TEST SWITCH

• Short push : Prints a network configuration page.

• Long push (more than 5 seconds) : Resets the network configuration back to factory default settings.

Ethernet

RJ-45

LED

Test Switch

Table of Contents