Brother NC-9100h Network User's Manual page 53

9
You will then be asked to enter the port settings for the remote
Print/Fax server:
Enter any unique legal Internet E-mail address for the remote
Print/Fax server (for example emailprinter@xyz.com). Note that
Internet E-mail addresses cannot have spaces in them.
Enter your E-mail address and the IP address of your SMTP
E-mail server (consult your network administrator if you do not
know this address). Also specify if you are going to use the
Partial E-mail Print option and the Notification type.
10
Press OK to continue. You will then be asked to re-start your
computer.
11
Once your computer has re-started you must create a printer on
your Windows
using the standard Windows
®
NT 4.0 printer setup procedure. To do this, go the Start button,
select Settings and then Printers (Windows
and Windows NT
select Printers and Other Hardware and then Printers and
Faxes (or Add a printer)(Windows
12
Select Add Printer to begin the printer installation.
13
Click Next when you get the Add Printer Wizard window.
®
<For Windows
14
Select Local Printer when you are asked how the printers are
connected to your computer and push Next.
<For Windows NT
14
Select Local Printer, and then delete the check mark in Plug
and Play check box.
®
<For Windows
14
Select Local Printer attached to this computer.
5 - 7 CONFIGURING INTERNET PRINTING FOR WINDOWS
®
98/Me/2000/XP and Windows NT
®
4.0). To do this, go to the Control Panel,
98/Me users>
®
4.0 and Windows
XP users>
®
98/Me/2000/XP and Windows
®
XP)
®
2000/XP users>
®
4.0 system
®
98/Me/2000/XP
®