Advertisement
3.1.3 Attach the support stay between the platform and the ladder by inserting it first into the platform
and then attaching it to the ladder. refer to figs.2 and 3.
3.1.4
lift the platform assembly to the horizontal position and attach the second ladder, following the
procedure outlined in paragraph 3.1.3.
note: ensure that the hole for the hand rail is nearest to the outer face of the ladder.
WarninG! the platform height must not exceed 0.95 metres for reasons of stability.
note: The maximum loading of the platform when assembled is 150kg.
3.2
stairway work platform
WarninG! assembling the stairway work platform is a two-man task.
3.2.1
Bolt the foot cross members to the bottom of each ladder. the feet are already attached to the
cross members. refer to fig.2.
3.2.2
attach the stairway work platform, at the desired height, to the ground-based ladder.
3.2.3
attach the support stay between the stairway work platform and and the ground-based ladder
by inserting it first into the platform and then attaching it to the ladder. Refer to Figs.2 and 3.
3.2.4
lift the other end of the work platform to the horizontal position and attach it to the second
ladder, located on the upper step of the stairway.
3.2.5
attach the second support stay between the stairway ladder and the work platform. refer to
fig.3.
3.2.6
the maximum height above the ground of the steps on which the stairway ladder is to located
when assembled is 0.56 metres. refer to fig.3.
danGer! never attempt to climb the scaffolding to get onto the work platform. always
access the work platform using a separate set of steps.
note: The maximum loading of the stairway work platform when assembled is 150kg.
3.3
extension ladder
imPorTanT! always position the ladder at an angle between 65° and 75° to the
horizontal. The ladder will be within this range if the base is one third of the effective
ladder length away from the foot of the wall. refer to fig.4.
3.3.1
assemble the extension ladder with the two lower rungs of the extension section set in the
retaining hooks of the top part of the ground based section. refer to fig.5.
3.3.2
the maximum height of the extension ladder is 2.7 metres (minimum overlap of two rungs).
3.4
step ladder
3.4.1
assemble the step ladder by connecting the top rung of one ladder to the retaining hooks
located on the top rung of the other ladder. refer to fig.6.
3.4.2
connect the support stays to each side of both ladders.
3.4.3
the height of the step ladder when assembled is 1.6 metres.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
imPorTanT: no liability is accepted for incorrect use of this product.
WarranTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
informaTion: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
sole uK distributor, sealey Group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
IP32 7ar
Original Language Version
fig.4
fig.5
www.sealey.co.uk
01284 757500
Web
01284 703534
sales@sealey.co.uk
email
ascl2
fig.6
Issue: 1 - 25/07/11
Advertisement
