Table of Contents
Advertisement
CHAPTER 5 TROUBLESHOOTING
4.1.2 Saddle stitcher Unit
E5F0
Main cause
Paper position plate motor (M44)
Paper positioning palte home position sensor (PI49)
Detection
The following detail codes are used:
01
02
E5F1-01
Main cause
Folder motor (M42)
Folder motor clock sensor (PI47)
Detection
The number of pulses from the folder motor drops below a specific value.
E5F1-02
Main cause
Folder motor (M42)
Paper folder home position sensor (PI58)
Detection
The state of the paper folding home position sensor does not change when
the folder motor is driven for 3 sec.
E5F2
Main cause
Guide motor (M43)
Guide home position sensor (PI54)
Detection
The following detail codes are used:
01
02
E5F3
Main cause
Alignment motor (M45)
Aligning plate home position sensor (PI48)
Detection
The following detail code are used:
01
02
5-104
COPYRIGHT© 2001 CANON INC.
The paper positioning plate home position sensor does not go ON
when the paper positioning plate is driven for 1.25 sec.
The paper position plate home position sensor does not go OFF
when the paper position plate motor is driven for 1 sec or more.
The guide home position sensor does not go ON when the guide
motor is driven for 0.4 sec or more.
The guide home position sensor does not go OFF when the guide
motor is driven for 1 sec or more.
The aligning plate home position sensor does not go ON when the
alignment motor is driven for 0.5 sec or more.
The aligning plate home position sensor does not go OFF when the
alignment motor is driven for 1 sec or more.
2000 2000 2000 2000
CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
Advertisement
Table of Contents
Troubleshooting
