Advertisement
4.2.3.
Assemble cross member spars (items D, H and G) and fix to base frame (fig.4, fig.5). DO NOT assemble end spars at this stage as the
cover will need to be threaded over the frame.
fig.4
4.2.4.
Ensuring that the correct side of the cover is facing outward, thread the end members
into the cover sleeve and also engaging the ground fixing tab (item J) (fig.6.). Draw the
cover over the remaining spars and fix in place using the hook and loop tabs built into it.
fig.6
4.2.5.
The shelter is provided with four anchor point plates (ground fixings not supplied). These are fitted to the main frame bases (items A)
as shown in fig.7 and fig.8.
fig.7
© Jack Sealey Limited
Do not
assemble ends
at this stage.
A
Ground fixings
NOT supplied
I
Original Language Version
H
D
Hook and loop
tabs
fig.8
CCS01 Issue 1 13/04/18
fig.5
I
Not
supplied
Advertisement
