Honeywell evohome Applications Manual page 45

4.10.2 Checking RF communication
HB85 sends test signals to the evotouch controller in order
to test the signal strength.
f Press the bind button of the HB85 briefly.
For approx. 10 minutes, HB85 transmits a test message
to the evotouch controller every 5 seconds.
The field strength is indicated on the evotouch
controller.
i
The signal strength can be EXCELLENT, GOOD,
POOR or not received
Completing configuration
f Press the DONE button.
Configuration of the HB85 temperature sensor is completed.
Application Manual 45