Toro Greensmaster TriFlex 3300 Series Operator's Manual
Spiker
Hide thumbs
Also See for Greensmaster TriFlex 3300 Series:
- Operator's manual (4 pages) ,
- Operator's manual (4 pages) ,
- Operator's manual (12 pages)
Related Manuals for Toro Greensmaster TriFlex 3300 Series
Summary of Contents for Toro Greensmaster TriFlex 3300 Series
- Page 1 Form No. 3443-670 Rev A Spiker Greensmaster ® 3300/3400 Series TriFlex ® Traction Unit Model No. 04723—Serial No. 406000000 and Up *3443-670* Register at www.Toro.com. Original Instructions (EN)
- Page 2 Whenever you need service, genuine Toro parts, or worthy of special attention. additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 identifies the location of the model and serial numbers on the product.
-
Page 3: General Safety
• Use only accessories, attachments, and working on the machine. replacement parts approved by Toro. • Keep clear of any discharge opening. Keep bystanders and pets away from the machine. Blade Safety •... - Page 4 Note: When the latches are properly locked, you can hear and feel a click. Insert the motor into the left side of the spiker unit (as viewed from the operator’s position), Installing the Spiker Units and pull the motor retaining bar on the spiker unit toward the motor until you hear a click from both sides of the motor (Figure...
-
Page 5: Operation
Install 4 washers (1/8 inch) per bolt between the counterweight and the spiker side plate (Figure Note: The washers (Part No. 63-8410) are not Installing the Electrical included with the spiker. Install the auxiliary weight (Part No. Counterweights 117-6774-03) with bolts. Note: You can use the auxiliary weight and Parts needed for this procedure:... -
Page 6: Preparing For Maintenance
Maintenance Removing the Spiker Units Prepare for maintenance; refer to Preparing for Maintenance (page 6) Preparing for Maintenance Push the motor retaining bar out of the slots on Before starting on any maintenance procedure, do the motor toward the spiker unit and remove the the following: motor from the spiker unit. -
Page 7: Servicing The Roller
The Roller Rebuild Tool Kit includes all the tools and the installation instructions required to rebuild a roller with the roller rebuild kit. Refer to your parts catalog or contact your authorized Toro distributor for assistance. g346125 Figure 9 5. - Page 8 Notes:...
- Page 9 The method of transmission shall be electronic transmittal. This machinery shall not be put into service until incorporated into approved Toro models as indicated on the associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in conformity with all relevant Directives.
- Page 10 The Toro Company (“Toro”) respects your privacy. When you purchase our products, we may collect certain personal information about you, either directly from you or through your local Toro company or dealer. Toro uses this information to fulfil contractual obligations - such as to register your warranty, process your warranty claim or to contact you in the event of a product recall - and for legitimate business purposes - such as to gauge customer satisfaction, improve our products or provide you with product information which may be of interest.
- Page 11 Countries Other than the United States or Canada Customers who have purchased Toro products exported from the United States or Canada should contact their Toro Distributor (Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisfied with your Distributor's service or have difficulty obtaining guarantee information, contact your Authorized Toro Service Center.