Step
Instruction
9
Assemble the top entry clear plastic busbar shroud.
10
Connect the laminated copper bars to the input terminals of the drive module.
11
Fasten the top entry clear plastic busbar shroud to the drive module.
11
Remove the
9b
protective film.
Step drill lead-throughs for the
9a
busbars.
11
11
11
Photo
9d
9c
Pass the laminated copper bars through the lead-
throughs and the lower part of the shroud
Top entry busbar shroud installed
Drive module of frame size R7 with bottom exit
Press the top cover on
9d
the sides inwards to
enable its tabs to enter
the slots in the lower
part of the shroud.
10
11
15
11