Canon EOS 1D Mark II N Instruction Manual page 163

C.Fn-07
0: Turns on after One-Shot AF
1: Turns off after One-Shot AF
This prevents the focus from being thrown off by inadvertent turning of the
focusing ring after One-Shot AF. With both C.Fn-07-1 and C.Fn-07-2,
manual focusing is possible with the lens focus mode switch set to <
2: Disabled in AF mode
Electronic manual focusing is disabled in the AF mode.
Applicable lenses
EF50mm f/1.0L USM, EF85mm f/1.2L USM, EF200mm f/1.8L USM,
EF300mm f/2.8L USM, EF400mm f/2.8L USM, EF400mm f/2.8L II USM,
EF500mm f/4.5L USM, EF600mm f/4L USM, EF1200mm f/5.6L USM,
EF28-80mm f/2.8-4L USM.
When both C.Fn-04 and C.Fn-07 are set, electronic manual focusing will be
enabled or disabled as follows:
Custom Function No.
C.Fn-07
* When in focus/Not in focus
C.Fn-08
0 : Remain. shots/File No.
1 : ISO/Remain. shots
Displays the ISO speed at all times. The number of remaining shots on the
rear LCD panel is displayed with more digits.
2 : ISO/File No.
Displays the ISO speed instead of the number of remaining shots. You can
tell when the number of remaining shots is low by seeing a low maximum
burst count displayed on the right in the viewfinder.
3 : Shots in n /Remain. shots
Displays the number of images saved in the selected folder. The number of
remaining shots on the top LCD panel is displayed with more digits. Images
recorded in the RAW+JPEG mode are counted as 1 per shot.
The ISO speed display in the viewfinder also changes in the same way.
USM lens electronic MF
Setting
0
1
2
k
: Enabled
Top LCD panel / Back LCD panel
3 Custom Function Settings
C.Fn-04
0, 2 1, 3
k/k k/k
l/l l/l
l/l l/l
l
: Disabled
g
>.
163