Using The Lcd Monitor; Shooting Mode - Canon Digital IXUS 300 User Manual

28 Basic Functions

Using the LCD Monitor

LCD Monitor

Shooting Mode

( ,
Indicator
• The LCD monitor setting (On or Off) is saved by the camera
when the power is turned off so that the same setting is
automatically available when the power is turned on again.
However, the setting may be lost when the power has been
turned off after the "Change the battery pack" message has
displayed, while the LCD monitor was on in shooting mode.
• In macro mode, the parallax phenomenon may cause images
composed with the viewfinder to be off-center. Use the LCD
monitor to compose close-ups in macro mode (p. 39).
• Set the flash to On or affix the camera to a tripod when the
upper indicator flashes orange and the camera blur warning
icon ( ) appears in the LCD monitor after the metering
preparations are complete.
The LCD monitor can be used to
compose images while shooting, adjust
settings menus and replay images.
• The image in the LCD monitor will
darken in strong sunlight or bright
light. This does not constitute a
malfunction.
, and
• Pressing the
LCD monitor on or off.
on the mode dial)
button turns the