Changing the IS-Mode Settings
•
If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is fixed to a
tripod.
•
When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.
Registering Functions to the c Button
•
Select
•
When this
function cannot be used in the current shooting mode or function setting.
, each press of the c button records white balance data (p. 75),
•
In
and the white balance settings also change to
Select [IS Mode], then press the qr buttons
●
to select an option.
Continuous
Shoot Only
Panning
Select [Set c button], then press the m
●
button.
Press the opqr buttons or turn the Â
●
dial to select the functions to register, then
press the m button.
Pressing the c button will call up the
●
registered function.
if you want to cancel a function.
symbol is shown on the bottom right of an icon, the
Changing Shooting Functions
Image stabilization is always on.
You can confirm the result directly
on the display, which makes it
easier to check the composition or
focus.
Image stabilization is only active at
the moment of shooting.
Image stabilization only counters
up and down motion. This option is
recommended for shooting objects
moving horizontally.
.
139