Changing Shooting Functions - Canon Powershot SD980 IS Digital Elph User Manual

Changing Shooting Functions

If you set the mode switch to 4, and the mode to G, you can change the
settings in the 4 tab (p. 48).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 156 – 159).
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
Choose [AF-assist Beam], then press the qr
●
buttons to choose [Off].
Choose [Flash Settings], then press the m
●
button.
Press the op buttons or turn the  dial to
●
choose [Red-Eye Lamp], then press the qr
buttons to choose [Off].
143