Removing Shipping Materials
In order to protect your FAX-L360 during shipping, the unit has been
packed with protective material that you must remove before using.
Follow these steps:
1.
Remove all pieces of shipping tape from the outside of the FAX-L360.
2.
Open the operation panel by grasping it with both hands and gently
pulling it toward you.
Remove protective sheet from the Automatic Document Feeder
(ADF), then gently close the operation panel by pressing it down
from the centre until it clicks.
N
The actual shipping materials may differ in shape, quantity, and position
from the ones shown above.
Chapter 2
Setting Up Your FAX-L360
2-7