Memory Reception - Canon imageCLASS MF6500 Series Advanced Manual

Advanced Fax
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
Reports and Lists
6
Troubleshooting
7
Appendix
8
Table of Contents
Index
DRPD: Optional Settings
If required, change the optional settings as follows:
1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4.
Use [ ] or [ ] to select
<DRPD:SELECT FAX>, then press [OK].
5.
Use [ ] or [ ] to select a ring pattern,
then press [OK].
<DOUBLE RING>
<SHORT-SHORT-LONG>
<SHORT-LONG-SHORT>
<OTHER RING TYPE>
<NORMAL RING>
6.
Press [Stop] to return to standby mode.
Back Previous
■

Memory Reception

The machine automatically receives faxes in memory when
printing is disabled under certain conditions (e.g., toner or paper
has run out). You can also set the machine to store all
documents in memory without automatically printing them.
1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select
<COMMUNICATIONS>, then press [OK].
4.
Use [ ] or [ ] to select <MEMORY
LOCK>, then press [OK].
5.
Use [ ] or [ ] to select <ON>, then press
[OK].
NOTE
When you select <OFF>, the machine starts to print the received
documents in memory.
TOP
Next
1-10