Portion Size - Miele CM 5410 Operating Instructions Manual

Portion size

The flavor of the coffee produced
depends not only on the type of coffee,
but also on the amount of water used.
You can program the amount of water
for all coffee drinks and hot water to
suit the size of your cups and the type
of coffee you are using. This does not
alter the amount of coffee used.
For coffee drinks that use milk, you can
also set the amount of milk or milk froth
to be dispensed with these drinks, as
well as the amount of coffee or
espresso. Additionally, you can set the
portion sizes for hot milk and milk froth
alone.
A maximum portion size can be
programmed for each type of drink.
Dispensing stops once this has been
reached. The maximum possible
portion size is then saved by the
appliance for this type of drink.
If the water container becomes empty
while making a drink, the coffee
machine will stop programming the
portion size. The portion size will not
be saved.
There are two ways of initiating the
programming of the portion size:
- by touching the drink button when
you are making a coffee, or
- by selecting Portion size
menu.
Parameters
CM 5410, CM 5510, CM 5710: The
changed portion size is always saved
in the current profile. The name of the
current profile is shown in the top left
of the display.
34
Canceling portion size programming
 Tap the drinks button again or the
Changing the portion size
while making a drink
You can change and save the portion
size for espresso , coffee ,
cappuccino , and latte macchiato 
while making these drinks.
 Place a cup under the main
 Tap the sensor button for the desired
The desired drink will be made and
will appear in the display.
 When the cup is filled up to the level
If you want to change the portion size
for coffee with milk, the ingredients of
the drink are saved one after the other
during preparation.
 When the quantity for each ingredient
in the
The programmed mix of ingredients and
the portion size will now be dispensed
every time that particular drink is
selected.
 sensor button for drinks from
Additional drinks .
dispenser.
drink until Change
display.
An audible tone will sound as soon as
portion size programming starts. (As
long as the volume has been set for
the audible signals – see "Volume".)
you want, confirm with OK.
reaches the level you want, confirm
with OK.
appears in the
Save