Canon SELPHY ES1 User Manual page 17

Paper
Do not touch the paper while it is being printed.
During printing, the sheet repeatedly moves back and forth along the top of the print
receptacle and in and out through the paper-handling slot. Please do not touch the sheet
during this process as this could damage the printer.
Do not allow too many sheets to accumulate in the print receptacle during printing.
Do not allow more than 50 sheets to accumulate in the print receptacle.
Prints
Please avoid the following actions as they may result in color change, color fading or
color bleeding.
• Sticking any type of adhesive tape onto the print surface.
• Allowing print surfaces to come into contact with vinyl materials.
• Applying alcohol or other volatile solvents to the print surface.
• Leaving print surfaces tightly pressed against any other surfaces or objects for prolonged periods.
If you wish to mount prints into an album, select an album with nylon-based sleeves, or
with propylene or cellophane sleeves.
Other types of sleeves may cause color loss or color bleeding.
To avoid print quality deterioration, do not store your prints in the following types of
locations.
• Locations that reach temperatures above 40 °C (104 °F)
• Humid or dusty locations
• Locations exposed to direct sunlight.
Color change may occur over time in accordance with conditions of storage. Canon
assumes no liability for color changes.
15