Video Input; Input Source Selection ( Video, S-Video ) - Canon LV-S3 Owner's Manual

Video Input

Input Source Selection ( Video, S-Video )

Direct Operation
Choose Video by pressing INPUT button on the top control or VIDEO
button on the remote control unit.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Menu Operation
1 Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to INPUT
Menu icon.
2 Press Point d
and then press SET button. Source Select Menu will appear.
3 Move the pointer to the source that you want to select and then
press SET button.
When selecting Auto, the projector automatically detects
Auto
incoming video signal, and adjusts itself to optimize its
performance. The projector selects connection in the
following order:
1st S-VIDEO
2nd VIDEO
The S-VIDEO has priority over the VIDEO
When video input signal is connected to VIDEO jack,
Video
select Video.
When video input signal is connected to S-VIDEO jack,
S-Video
select S-Video.
30
button to move the red arrow pointer to Video
INPUT button
Video
Computer
INPUT MENU
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the
source and press SET button.
Move the red arrow
pointer to Video and
press SET button.