Attaching the optional handset* ______________
*The handset is available as an option in some countries.
Remove the screws on the left side of the
1
fax.
Place the handset on its cradle.
3
Connecting the AC power cord ________________
Plug the fax into a 200–240 volt AC 50/60 Hz outlet.
Plug the power cord connector into the
1
rear of the unit.
6
Attach the handset cradle.
2
Plug the other end of the power cord
2
into a properly grounded AC outlet.
There is no power switch on the fax. The power is
on as long as the fax is plugged in.