Brother PE-600II User Manual page 53

EMBROIDERING TUTORIAL ——————————————————————————————————————————————
The numbers indicate the thread path for each of the numbered needle bars. Be very careful to
correctly thread the needle bars.
6
5
4
6 5
6
5
4
1 Place on spool pin 1 the spool of thread with
the color (lime green) specified for needle bar
1.
• Make sure that the spool stand is opened in
the shape of a V.
• When using small spools of thread, be sure
to place the enclosed spool mat on the spool
pin before placing the spool on the pin.
• Use spool cap on all spools of thread shorter
than the height of the spool pin.
1 Spool mat
2 Small spool
3 Spool cap
36
1
2
3
2 1
1
2
3
4 3
5
6
6
5
4
3
2 Pass the thread through the number 1 hole in
the thread guide just above the spool, and
then pass the thread through the number 1
hole in the thread guide toward the front of
the machine.
2
1 Number 1 hole in the thread guide above the
spool
2 Number 1 hole in the thread guide toward the
front of the machine
2
1
1
2
1