D-Link COVR-C1213 User Manual

D-Link COVR-C1213 User Manual

Dual band whole home wi-fi system

Advertisement

Covr your whole home in Seamless Wi-Fi
More Coverage
One Seamless Network
High Performance
COVR-C1213
USER MANUAL
Dual Band Whole Home Wi-Fi System

Advertisement

Table of Contents
loading

Summary of Contents for D-Link COVR-C1213

  • Page 1 Covr your whole home in Seamless Wi-Fi More Coverage One Seamless Network High Performance COVR-C1213 USER MANUAL Dual Band Whole Home Wi-Fi System...
  • Page 2 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
  • Page 3: Table Of Contents

    IPv4/IPv6 Rules ...............51 COVR-C1200 LED Indicator ..........5 Port Forwarding ..............52 Rear Panel ................6 Port Forwarding .............52 D-Link Wi-Fi App Setup .............. 7 Virtual Server ..............53 Web Based Installation .............. 9 Website Filter ..............54 Static Routes .................55 Configuration ..............10 IPv4 ..................55...
  • Page 4 Table of Contents Registering a D-Link Cloud Service Account ....70 Amazon Alexa Setup ............73 Amazon Alexa Voice Commands ........77 Google Assistant Setup ............78 Google Assistant Voice Commands ......81 Adding Additional Covr Points ........82 Connect to a Wireless Client ...........83 WPS Button ...................83 Wireless Basics ..............84...
  • Page 5: Product Overview

    COVR-C1210 Covr Point A Router (x 1) Ethernet Cable COVR-C1200 Covr Point (x 2) Simple Setup Guide Power adapter (x 3) Wi-Fi Configuration Card Quick Install Card If any of the above items are missing or damaged, please contact your local reseller. D-Link COVR-C1213 User Manual...
  • Page 6: System Requirements

    • Firefox 28 or higher • Safari 6 or higher • Chrome 28 or higher D-Link Wi-Fi App • iOS or Android device (Please refer to the mobile app's store page Requirements to check whether your device is compatible) D-Link COVR-C1213 User Manual...
  • Page 7: Features

    Wi-Fi by adding another Covr Point to get true whole-home coverage. Easy Setup - Using the free D-Link Wi-Fi app or the intuitive web-based user interface, you can quickly set up the COVR-C1213 and configure your network with your specific settings in a matter of minutes.
  • Page 8: Hardware Overview

    The COVR-C1210 is powered off. If the device is powered on and Status LED is disabled, the device is working as normal. Refer to the Admin section on page 63 for more information. D-Link COVR-C1213 User Manual...
  • Page 9: Covr-C1200 Led Indicator

    A) has been established. The COVR-C1200 device is powered off. If the device is powered on and Status LED is disabled, the device is working as normal. Refer to the Admin section on page 63 for more information. D-Link COVR-C1213 User Manual...
  • Page 10: Rear Panel

    Press this button to establish an instant connection to a wireless client using Wi-Fi Protected Setup (WPS). Cover Plate Removal Press this button to release the top cover plate on the device to replace it with a different color plate. Button D-Link COVR-C1213 User Manual...
  • Page 11: D-Link Wi-Fi App Setup

    Note: The screenshots may be different depending on your mobile device’s OS version. The following steps show the iOS interface of the D-Link Wi-Fi app. If you are using an Android device, the appearance may be different from that of the screenshots, but the process is the same.
  • Page 12 6. Alternatively, you can tap No to proceed to step 5. Quick Install Card Step 5 Slide the product options to Router and select COVR-C1213 from the list of available devices. Tap Next to continue. Step 6 You will now be guided through a step-by-step process for setting up the COVR-C1213.
  • Page 13: Web Based Installation

    Web Based Installation If you do not wish to use the D-Link Wi-Fi app, you can manually set up the COVR-C1213 and configure your Covr Wi-Fi network using the web-based user interface. Follow the instructions below to set up your COVR-C1213 Dual Band Whole Home Wi-Fi System.
  • Page 14: Configuration

    The bar at the top of the page has quick access to Settings , Features, and Management functions. You may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link COVR-C1213 User Manual...
  • Page 15: Home

    The menu bar at the top of the page will allow you to quickly navigate to other pages. Refer to the following pages for a description of each section. D-Link COVR-C1213 User Manual...
  • Page 16: Internet

    Click Release IP Address to release the current IP address and disconnect from the Internet. If you wish to reconnect the Internet, click Renew IP Address. To reconfigure the Internet settings, click Go to settings at the bottom-right. D-Link COVR-C1213 User Manual...
  • Page 17: Covr-C1210

    Click on the COVR-C1210 icon to view details about the Covr Point's wireless and local network settings. This includes IPv4 and IPv6 local network, and Wi-Fi information. This overview is only informational. To configure these sections, refer to the corresponding configuration sections in this manual. D-Link COVR-C1213 User Manual...
  • Page 18: Connected Clients

    The schedule may be set to Always Off, or you can create your own schedules in the Schedule section. Refer to Schedule on page 60 for more information. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 19: Covr Points

    To remove a Covr Point from your Covr Wi-Fi network, click the settings icon in the bottom-right of the Covr Point's box and click Remove. Enter a name for the Covr Point. Name: Displays the MAC address of the Covr Point. MAC Address: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 20: Settings

    This Wizard will also launch when clicking the Click to Repair button when no Internet connection is detected. Refer to Manual Installation on page 9 for more information. D-Link COVR-C1213 User Manual...
  • Page 21: Internet

    For PPPoE refer to page 20. For PPTP refer to page 22. For L2TP refer to page 24. For DS-Lite refer to page 26. To configure an IPv6 connection, click the IPv6 link. Refer to page D-Link COVR-C1213 User Manual...
  • Page 22 MAC Address of port 1 on Covr Point A. You can use the drop-down menu to replace Clone: the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 23 MAC Address of port 1 on Covr Point A. You can use the drop-down menu to replace Clone: the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 24 The default MAC address is set to the physical interface MAC address MAC Address of port 1 on Covr Point A. You can use the drop-down menu to replace Clone: the Internet port’s MAC address with the MAC address of a connected client. D-Link COVR-C1213 User Manual...
  • Page 25 MAC Address of port 1 on Covr Point A. You can use the drop-down menu to replace Clone: the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 26 Enter the secondary DNS server IP address assigned by your ISP. This Secondary DNS address is usually obtained automatically from your ISP. Server: Maximum Transmission Unit - you may need to change the MTU for MTU: optimal performance with your ISP. D-Link COVR-C1213 User Manual...
  • Page 27 Enter the secondary DNS server IP address assigned by your ISP. Secondary DNS Server: Maximum Transmission Unit - you may need to change the MTU for MTU: optimal performance with your ISP. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 28 Enter the secondary DNS server IP address assigned by your ISP. This Secondary DNS address is usually obtained automatically from your ISP. Server: Maximum Transmission Unit - you may need to change the MTU for MTU: optimal performance with your ISP. D-Link COVR-C1213 User Manual...
  • Page 29 Enter the secondary DNS server IP address assigned by your ISP. Secondary DNS Server: Maximum Transmission Unit - you may need to change the MTU for MTU: optimal performance with your ISP. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 30 B4 IPv6 Address: Once connected, the WAN IPv6 address will be displayed here. WAN IPv6 Address: Once connected, the IPv6 WAN default gateway address will be IPv6 WAN Default displayed here. Gateway: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 31: Ipv6

    For Auto Detection refer to page 28. For Static IPv6 refer to page 30. For Auto Configuration (SLAAC/DHCPv6) refer to page 32. For PPPoE refer to page 34. For 6rd refer to page 37. For Local Connectivity Only refer to page 39. D-Link COVR-C1213 User Manual...
  • Page 32 LAN IPv6 Link- Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: Enter a valid LAN IPv6 address. LAN IPv6 Address: Displays Covr Point A's LAN link-local address. LAN IPv6 Link- Local Address: D-Link COVR-C1213 User Manual...
  • Page 33 Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. IPv6 Address Range (End): If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in IPv6 Address minutes). Lifetime: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 34 Enter the secondary DNS server address. Secondary DNS Server: LAN IPv6 Address Settings Enter the LAN (local) IPv6 address for Covr Point A. LAN IPv6 Address: Displays Covr Point A's LAN link-local address. LAN IPv6 Link- Local Address: D-Link COVR-C1213 User Manual...
  • Page 35 Enter the starting IPv6 address for the DHCP server’s IPv6 assignment. IPv6 Address Range (Start): Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. IPv6 Address Range (End): Enter the IPv6 address lifetime (in minutes). IPv6 Address Lifetime: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 36 LAN IPv6 Link- Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: Enter a valid LAN IPv6 address. LAN IPv6 Address: Displays Covr Point A's LAN link-local address. LAN IPv6 Link- Local Address: D-Link COVR-C1213 User Manual...
  • Page 37 Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. IPv6 Address Range (End): If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in IPv6 Address minutes). Lifetime: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 38 ISP. Enter the ISP service name (optional). Service Name: Select either Always On or Manual. Reconnect Mode: Maximum Transmission Unit - you may need to change the MTU for MTU: optimal performance with your ISP. D-Link COVR-C1213 User Manual...
  • Page 39 LAN IPv6 Link- Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: Enter a valid LAN IPv6 address. LAN IPv6 Address: Displays Covr Point A's LAN link-local address. LAN IPv6 Link- Local Address: D-Link COVR-C1213 User Manual...
  • Page 40 Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. IPv6 Address Range (End): If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in IPv6 Address minutes). Lifetime: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 41 Enter the 6rd border relay IPv4 address settings supplied by your ISP. 6rd Border Relay IPv4 Address: LAN IPv6 Address Settings Displays Covr Point A's LAN IPv6 Address link-local address. LAN IPv6 Address: Displays Covr Point A's LAN link-local address. LAN IPv6 Link- Local Address: D-Link COVR-C1213 User Manual...
  • Page 42 Enter the starting IPv6 address for the DHCP server’s IPv6 assignment. IPv6 Address Range (Start): Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. IPv6 Address Range (End): Enter the IPv6 address lifetime (in minutes). IPv6 Address Lifetime: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 43 If you selected Enable ULA and disabled Default ULA Prefix: Enter your own ULA prefix. ULA Prefix: Current IPv6 ULA Settings Displays the current ULA prefix. Current ULA Prefix: Displays the LAN's IPv6 ULA. LAN IPv6 ULA: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 44: Vlan

    Select a priority ID from the drop-down menu to assign to the Priority ID: corresponding VLAN. Interface Traffic Type Setting From the drop-down menu, select the VLAN for LAN port 1. LAN Port: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 45: Wireless

    Enable or disable WPS Push Button Configuration (PBC) functionality. WPS-PBC Status: Enabling this feature allows wireless clients to connect to the Covr Wi-Fi through an encrypted connection by using the WPS button. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 46: Guest Zone

    Schedule section. Refer to Schedule on page for more information. Home Network Access Enabling this option will confine connectivity to the Internet, Internet Access preventing guests from accessing other local network devices. Only: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 47: Network

    Enter the domain name (optional). Local Domain Name: Disable to transfer the DNS server information from your ISP to your Enable DNS Relay: computers. If enabled, your computers will use Covr Point A for a DNS server. D-Link COVR-C1213 User Manual...
  • Page 48 Enable to allow IPv4 multicast traffic to pass through Covr Point A IPv4 Multicast from the Internet. Streams: Enable to allow IPv6 multicast traffic to pass through Covr Point A IPv6 Multicast from the Internet. Streams: Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 49: D-Link Cloud

    D-Link Cloud In the Settings menu on the bar at the top of the page, click D-Link Cloud to see your D-Link Cloud Service details. This page lists whether you are registered with D-Link Cloud Service and email address associated with the account. Use the D-Link Wi-Fi app to find out more about D-Link Cloud's features.
  • Page 50: Operation

    You may set your Covr Point to operate in Router Mode or in Bridge Your device Mode. You will need to reset your Covr Point in order to change it operation mode from Bridge Mode to Router Mode Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 51: Features

    Upload Speed combined. If QoS is enabled, once this threshold is reached, traffic of (Mbps): clients with higher priority will be processed first, while traffic of lower priority clients will wait until enough bandwidth becomes available. D-Link COVR-C1213 User Manual...
  • Page 52 If you want to remove a priority assignment from a device and return it to the Connected Clients list, click the close button (x) in the top right of the device card. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 53: Firewall

    Enable this feature to protect your network from certain kinds of Enable Anti-Spoof “spoofing” attacks. Checking: Enable or disable IPv6 simple security. IPv6 Simple Security: Enable or disable IPv6 ingress filtering. IPv6 Ingress Filtering: D-Link COVR-C1213 User Manual...
  • Page 54 NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 55: Ipv4/Ipv6 Rules

    The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Refer to Schedule on page 60 for more information. Click Apply when you are done. D-Link COVR-C1213 User Manual...
  • Page 56: Port Forwarding

    The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 60 for more information. Click Apply when you are done. D-Link COVR-C1213 User Manual...
  • Page 57: Virtual Server

    The schedule may be set to Always Enable, or you can create your own schedules in the Schedule section. Refer to Schedule on page 60 for more information. Click Apply when you are done. D-Link COVR-C1213 User Manual...
  • Page 58: Website Filter

    URL or domain. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 59: Static Routes

    A value of 1 is the lowest cost and 16 is the highest cost. Select the interface that the IP packet must use to transit out of the Interface: router when this route is used. Click Apply when you are done. D-Link COVR-C1213 User Manual...
  • Page 60: Ipv6

    A value of 1 is the lowest cost and 16 is the highest cost. Select the interface that the IP packet must use to transit out of the Interface: router when this route is used. Click Apply when you are done. D-Link COVR-C1213 User Manual...
  • Page 61: Dynamic Dns

    Enter a timeout time (in hours). Time Out: Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to following page. D-Link COVR-C1213 User Manual...
  • Page 62 Enter the host name that you registered with your dynamic DNS Host Name: service provider. Enter the IPv6 address of the dynamic DNS server. Alternatively, select IPv6 Address: the server device in the drop-down menu. Click Apply when you are done. D-Link COVR-C1213 User Manual...
  • Page 63: Management

    Displays the current date and time of the extender. Time: Automatic/Manual Time Configuration Select from the drop-down menu to either use the D-Link NTP Server NTP Server: to synchronize the time and date for your router, or choose Manual to set the NTP server's IP address.
  • Page 64: Schedule

    You can add multiple days to the schedule, but only one period per day. To remove a time period from the schedule, click on the cross icon. Click Apply when you are done. D-Link COVR-C1213 User Manual...
  • Page 65: System Log

    Covr Point A, select it from the drop-down menu to Address: automatically populate the field. Email Settings Enable this option if you want the logs to be automatically sent to Enable E-mail an email address. Notification: D-Link COVR-C1213 User Manual...
  • Page 66 The schedule may be set to Always, or you can create your own schedules in the Schedule section. Refer to Schedule on page 60 for more information. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 67: System Admin

    Point A and 8080 is the port used for the web management interface. Note: If you enabled Use HTTPS and wish to access Covr Point A remotely and securely, you must enter https:// at the beginning of the address. D-Link COVR-C1213 User Manual...
  • Page 68 -Establishing a WPS connection -Weak uplink signal -No uplink signal Once any of the above situations has ended, the LED will briefly light up solid white and then turn off again. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 69: System

    Use the drop-down menu to select a schedule for the device to Auto Reboot: automatically reboot. The schedule may be set to Never, Daily, or Weekly. Depending on your selection, set a time and date for the auto reboot schedule. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 70: Upgrade

    Next, select a device from the drop-down menu to Firmware: upgrade firmware for. Then, click the Select File button and browse to the firmware file you want to install. With the file selected, click Upload to begin the upgrade process. D-Link COVR-C1213 User Manual...
  • Page 71 Enable this function to set the router to automatically upgrade its Time: firmware at a set time. Upgrade Time: Configurable if Choose Upgrade Time is enabled. Set the hour and minute to automatically upgrade by using the drop-down menus. Click Save when you are done. D-Link COVR-C1213 User Manual...
  • Page 72: Statistics

    You can view the Internet, LAN, Wi-Fi 2.4GHz, and Wi-Fi 5GHz by clicking on the respective tabs at the top of the graph. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link COVR-C1213 User Manual...
  • Page 73: Third Party Services

    Third Party Services Connect to the future of intelligent home network control. The COVR-C1213 Dual Band Whole Home Wi-Fi System integrates with your Google Assistant and Alexa, so you can finally manage and control your network without lifting a finger. Features include enabling and disabling your Wi-Fi guest zone without having to go into the UI, rebooting the router and checking your router for firmware upgrades.
  • Page 74: Registering A D-Link Cloud Service Account

    In order to use third party services to control and manage your device, you will first need to register your device with the D-Link Cloud Service. Follow the steps below if you do not have a D-Link Cloud Service account.
  • Page 75 Section 4 - Third Party Services Step 3 Tap the Cloud Service icon. Step 4 Tap the Register button. D-Link COVR-C1213 User Manual...
  • Page 76 In this menu, you can sign up for a D-Link account using Facebook, Google or an Email address. If you already have a D-Link account, you can tap the Log In link at the bottom of the screen to be redirected to the login page.
  • Page 77: Amazon Alexa Setup

    Section 4 - Third Party Services Amazon Alexa Setup You will need the Amazon Alexa app, an Amazon account, an Amazon Alexa device and a D-Link Cloud Service account to use this feature. Note: The screenshots may be different depending on your mobile device’s OS version, your version of the Alexa app, as well as what personal information may appear onscreen.
  • Page 78 Section 4 - Third Party Services Step 3 Tap on Skills & Games. Step 4 Search for "D-Link Wi-Fi". Tap on the search result. D-Link COVR-C1213 User Manual...
  • Page 79 Section 4 - Third Party Services Step 5 Tap ENABLE TO USE to link the skill. Step 6 Sign in using your D-Link account details. D-Link COVR-C1213 User Manual...
  • Page 80 Section 4 - Third Party Services Step 7 Congratulations! D-Link Wi-Fi has been successfully linked as a skill for your Amazon device. Close the window by tapping Done on the top left corner of the screen. Refer to Amazon Alexa Voice Commands on page 77 for tasks that you can ask your Amazon Alexa to perform.
  • Page 81: Amazon Alexa Voice Commands

    Section 4 - Third Party Services Amazon Alexa Voice Commands With D-Link Wi-Fi enabled as a skill for Alexa, you can ask Alexa to do any of these tasks: Task Command Enable the guest zone. “Alexa, ask D-Link Wi-Fi to enable my guest zone. ”...
  • Page 82: Google Assistant Setup

    You will need the Google Assistant app, a Google account, a Google Home device (or a device with Google Assistant built- in) and a D-Link Cloud Service account to use this feature. Note: The screenshots may be different depending on your mobile device’s OS version, your version of the Assistant app, as well as what personal information may appear onscreen..
  • Page 83 Section 4 - Third Party Services Step 3 Tap or say Yes. Step 4 Sign in using your D-Link account details. D-Link COVR-C1213 User Manual...
  • Page 84 Step 5 Tap Allow to continue setup. Step 6 Congratulations! D-Link Wi-Fi has been successfully linked to your Google Home device. Refer to Google Assistant Voice Commands on page 81 for tasks that you can ask your Assistant to perform.
  • Page 85: Google Assistant Voice Commands

    Section 4 - Third Party Services Google Assistant Voice Commands With D-Link Wi-Fi enabled as a skill for the Google Assistant, you can ask your Assistant to do any of these tasks: Task Command Enable the guest zone. “OK Google, talk to D-Link Wi-Fi to enable my guest zone. ”...
  • Page 86: Adding Additional Covr Points

    Covr Point changes from blinking orange to solid white, the new Covr Point is paired and will reboot itself to complete the setup process. Step 3 Disconnect the Ethernet cable and place the new Covr Point anywhere in your home to extend your whole home Wi-Fi. D-Link COVR-C1213 User Manual...
  • Page 87: Connect To A Wireless Client

    Step 2 - Within 120 seconds, press the WPS button on your wireless device (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for your connection to be configured. Once the COVR LED stops blinking, you will be connected and your wireless connection will be encrypted with WPA2. D-Link COVR-C1213 User Manual...
  • Page 88: Wireless Basics

    Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
  • Page 89 Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. D-Link COVR-C1213 User Manual...
  • Page 90 The wireless connection in public places is usually called “hotspots”. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers.
  • Page 91: Tips

    Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. D-Link COVR-C1213 User Manual...
  • Page 92: Technical Specifications

    • 128-bit AES data encryption • WPA/WPA2 wireless encryption • Single button Wi-Fi Protected Setup (WPS) • Covr Wi-Fi Advanced Features • D-Link Wi-Fi App Setup and Configuration • Quality of Service (QoS) • Bridge Mode • Auto-configuration • MU-MIMO (Wi-Fi) •...
  • Page 93: Regulatory Information

    Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link COVR-C1213 User Manual...
  • Page 94 This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. D-Link COVR-C1213 User Manual...
  • Page 95 3. le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. D-Link COVR-C1213 User Manual...
  • Page 96 être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. NCC 警語 : 以下警語適用台灣地區 依據 低功率電波輻射性電機管理辦法 第十二條: 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變 更原設計之特性及功能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至 無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工 業、科學及醫療用電波輻射性電機設備之干擾。 電磁波曝露量MPE標準值(MPE) 1 mW/cm ,送測產品實值為 0.3693 mW/cm 應避免影響附近雷達系統之操作 。 高增益指向性天線只得應用於固定式點對點系統 。 D-Link COVR-C1213 User Manual...
  • Page 97 Potencia máxima de Salida Frequenza/e Potenza max. Output Frequentie(s) Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 2.4 G 2.4 – 2.4835 GHz 100 mW D-Link COVR-C1213 User Manual...
  • Page 98 υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink. com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...
  • Page 99 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...
  • Page 100 Appendix C - Regulatory Information Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
  • Page 101 Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link COVR-C1213 User Manual...
  • Page 102 5 Ghz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link COVR-C1213 User Manual...
  • Page 103 Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link COVR-C1213 User Manual...
  • Page 104 • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link COVR-C1213 User Manual...
  • Page 105 • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link COVR-C1213 User Manual...
  • Page 106 • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link COVR-C1213 User Manual...
  • Page 107 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
  • Page 108 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
  • Page 109 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
  • Page 110 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
  • Page 111 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
  • Page 112 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
  • Page 113 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.

Table of Contents