Sony IFB-X600E Operating Instructions Manual page 2

English
The IFB-X600E interface board is designed to be mounted on Sony
VPL-X600E/S600E LCD data projector so that composite video or S
video (Y/C) signals and audio signals from video equipment can be
input.
Mounting the IFB-X600E
Note
Before installing the board, make sure the following have been done:
• Turn off the power of the projector.
• Disconnect the projector power cable from the wall outlet.
1 Remove the blind plate on the rear of the projector by
loosening the two screws with the supplied Philips
screwdriver.
2