e
(For MFC-7440N)
Press 1 to choose Change.
f
Enter the Node Name.
Press OK.
Note
For DCP-7045N:
You cannot change the Node Name from the control panel menu. See Changing the print server
settings on page 15 for how to change the Node Name.
g
Press Stop/Exit.
WINS Config
This selection controls how the machine obtains the IP address of the WINS server.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose TCP/IP.
Press OK.
d
Press a or b to choose WINS Config.
Press OK.
e
Press a or b to choose Auto or Static.
Press OK.
f
Press Stop/Exit.
Auto
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto for this feature to work.
Static
Uses a specified IP address for the primary and secondary WINS servers.
Control panel setup
3
3
3
3
22