Electrolux AEG BHBS18-75BL Original Instructions Manual page 13

TECHNICAL DATA
Belt Sander
Production code
Battery voltage
Belt speed no load
Sanding width
Belt length
Dimensions of grinding plate
Weight according EPTA-Procedure 01/2014 (Li-Ion 1,5 Ah...9,0 Ah)
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise information
GB
Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 62841
Vibration emission value a
Uncertainty K=
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration and noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
Wear ear protectors. Exposure to noise can cause hearing loss.
WARNING Read all safety warnings, instructions, illustra-
tions and specifications provided with this power tool. Failure
to follow all instructions listed below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
BELT SANDER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is recom-
mended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
Do not reach into the machine while it is running.
Chips and splinters must not be removed while the machine is
running.
English
14 14
h
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Do not machine any materials that present a danger to health (e.g.
asbestos).
When grinding metal, flying sparks are produced. Take care that
no persons are endangered. Because of the danger of fire, no
combustible materials should be located in the vicinity (spark flight
zone). Do not use dust extraction.
Do not let any metal parts enter the airing slots - danger of short
circuit!
WARNING To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as seawater, certain industrial
chemicals, and bleach or bleach containing products, etc., Can
cause a short circuit.
BHBS18-75BL
4743 95 02...
4743 99 02...
... 000001-999999
18 V
135 - 300 m/min
75 mm
457 mm
89 x 151 mm
3,44 kg..., 3,99 kg
-18°C ... +50°C
L1815R..., L1890RHD
BLK1218, BL1218,
AL1218G, AL18G
85,0 dB (A)
96,0 dB (A)
3,4 m/s
2
1,5 m/s
2