AEG MC 4406 CD/MP3 Instruction Manual & Guarantee page 47

Description of the CD buttons
II (14/3)
You can briefl y interrupt and resume playback using this button.
The playing time that has elapsed fl ashes in the display. Pres-
sing again continues playback.
I / I SEARCH/SKIP (16/15-5)
With an audio CD or a CD in MP3 format playing:
With I (15/5) you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks (the sound is muted).
• If the button is kept pressed down in stop mode the machine
quickly plays through the songs until the desired track is
reached. When the II button is pressed the track begins to
play back.
The I button (16/5) can be used as follows:
Press once = This starts the current track again from the
beginning.
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc. If the button
is kept pressed down, the machine starts
to search through the tracks (the sound is
muted). If the button is kept pressed down
in stop mode the machine quickly plays
through the songs until the desired track is
reached. When the
the track begins to play back.
STOP (17/4)
The CD stops.
REP/RAN (7 on the remote control)
Press once: the current track is repeated continuously
(the
Press twice: the whole CD is played continuously
(the
Press three times: the display (13) contains the word RAN. and
the track number that is to be played fi rst.
All tracks are played back in random order.
Press four times: all functions are cancelled. The normal play
mode is resumed.
Only for CDs in MP3 format
Press once: the current track is repeated continuously
(
Press twice: the whole CD is played continuously
(
05-MC 4406 AEG New4 47
II button is pressed
emits a fi xed light).
ALL emits a fi xed light).
appears in the display).
ALL appears in the display).
Press three times: the selected folder of the MP3 CD is repea-
ted continuously (
in the display). The individual folders can be
selected with the DN/UP FOLDER buttons
(6 on the remote control) and FOLDER UP
(10 on the device).
Press four times: the display (13) contains the word RAN.,
MP3 and the track number that is to be
played fi rst. All tracks are played back in
random order.
Press fi ve times: the function is deactivated and the CD is
played in the normal mode.
FOLDER DN (6 on the remote control)
Press this button during playback to change to a folder further
down. The display, e.g. F 01 appears. Then the CD begins to
play back automatically. If the button is pressed in stop mode,
the message also appears in the display. Then start playback
with the II button.
FOLDER UP (10) (6 on the remote control)
Press this button during playback to change to a higher folder.
See the above paragraph for the following step.
NOTE:
Some keys are to be found both on the device itself and
on the remote control. Keys with the same designation
have the same function.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the STOP key (17/4).
2. Press the PROG/CLK-ADJ key (21/8). „000 P01" (memory
location) appears in the display (13) together with the ab-
breviation PROG. In MP3 format the number of the fi le (00)
fl ashes, while the track number (000), the word PROG and
the memory storage number P01 are shown. Use the I
/ I buttons (16/15/5) to select the desired track and then
press the PROG/CLK-ADJ button (21/8) again. The display
changes to memory slot P02.
3. Select the next track with the I
the PROG/CLK-ADJ key again. Repeat the procedure until
all the desired tracks are selected. In MP3 format fi rst select
the folder. Press the PROG/CLK-ADJ button and then select
the desired track.
4. Press the II key (14/3). The playback starts. The selected
track numbers are shown in the display in the correct order
and the symbol CD or MP3 and PROG. light up. Press this
button to pause briefl y the playback.
5. Press once the STOP key (17/4) to stop the playback
while retaining the program.
6. To resume the playback of the program press fi rst the
PROG/CLK-ADJ key (21/8) once and then the
(14/3).
7. To delete the program, press the
The PROG. control lamp goes out.
FOLDER appears
/ I key and press
II key
STOP key (17/4) twice.
47
31.10.2006, 14:39:57 Uhr