AEG LE6F3820SX User Manual page 16

16 www.aeg.com
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the Delay Start
option before you press the
button Start/Pause
After pressing the button
Start/Pause
cancel the Start/Pause
option.
To cancel the Delay Start
a. Press the button Start/Pause
to set the appliance to pause.
The indicator of button
flashes.
b. Press the button Delay Start
until the display shows
Press the Start/Pause button
again to start the programme
immediately.
10.8 Interrupting a
programme and changing the
options
You can change only some options
before the programme carries them out.
1. Press the Start/Pause
interrupt the running programme.
The related indicator flashes.
2. Change the options.
3. Press the Start/Pause
again.
The programme continues.
10.9 Cancelling a running
programme
1. Turn the programme knob to
position
and to deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
.
you can only
option:
.
button to
button
to cancel the programme
Before starting the new
programme the appliance
could drain the water. in this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.10 Opening the door when
the delay start operates
While the delay start operates, the
appliance door is locked and the display
shows the indicator
1. Press Start/Pause
appliance.
2. Wait until the door lock indicator
goes off.
3. Open the door.
4. Close the door.
5. Press Start/Pause
The delay start continues to operate.
10.11 Opening the door when
the programme operates
While the programme operates, the
appliance door is locked and the
indicator appears.
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the door.
1. Turn the programme knob to
position to deactivate the
appliance.
2. Wait some minutes until the indicator
goes off and then open carefully
the appliance door.
3. Close the appliance door.
4. Set the programme again.
10.12 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
.
to pause the
again.