Yamaha DTX-PRO Reference Manual page 35

MENU Button
Screen Parameter Settings
VoiceLayerSw
stack
alt
VoiceHoldMode
on
off
MessageType
note
Note.1–4 off, 1(C
127(G8)
MIDI Ch 1–16
GateTime 0.0s–9.9s
Description
Sets how the voices assigned to the trigger
input source are played.
Plays voices registered to layers simultane-
ously.
Plays voices registered to layers in sequential
order.
Sets the hold mode for the voice.
When User is selected for the voice category,
striking the pad plays the sounds repeatedly in
a loop, and striking the pad again stops the
sound. MIDI Key On and Key Off messages are
sent alternately each time the pad is struck.
With this setting, the pad plays one-shot
sounds.
A MIDI Note On message is sent when a pad is
struck, and the corresponding Note Off mes-
sage is sent automatically after the gate time
has elapsed.
Sets the type of MIDI message to be sent
when the pad is struck.
Any setting other than "note" does not produce a
sound when the pad is struck.
Sends a MIDI note. Use this parameter to set
the pad to produce a sound when struck. You
can assign a MIDI note to each layer to send
up to four MIDI notes at once.
#
-2) – Sets the MIDI note number that is sent when-
ever a trigger signal is received at the selected
trigger input source.
Settings are displayed as "Note number / Note
name."
You can use the [F3] button to select Note1 to
Note4 in order.
Sets which MIDI channel to use for sending out
the MIDI message to play the Trigger Input
Source.
Sets the gate time (the time that passes
between the output of MIDI Key On and Key
Off messages) for the trigger input.
DTX-PRO DTX-PROX Reference Manual 35