Table of Contents
Advertisement
Wall mounting
1
Make sure the level is on top and in a horizontal position.
2
Draw the position of the four holes with a pencil.
Use a power drill with a 15/64 inch (about 6 mm) drill bit to drill four holes
3
in the wall.
First install the plugs into the four holes, then place the mounting
–
4
6
bracket and use a screwdriver and four strong screws to fix in place.
• For brick wall, use brick wall plugs and strong screws. (4A, 5)
• For drywall, use drywall plugs and strong screws. (4B, 5)
7
Connect the power adapter.
Place the main frame on the mounting bracket, and make sure the
8
positioning pin is inserted into the positioning hole
indicates it has been installed correctly.
The wall mounting bracket has a built-in reel to wind the cord around
2
and keep the cord tidy.
1
2
4A
4B
1
2
7
2
3
5
6
8
. A clicking sound
1
Advertisement
Table of Contents
