Related Manuals for Asus AAEON RTC-710RK
Summary of Contents for Asus AAEON RTC-710RK
- Page 1 RTC-710RK Rugged Tablet Computer User’s Manual 1 Last Updated: August 26, 2021...
- Page 2 Copyright Notice This document is copyrighted, 2021. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
- Page 3 Acknowledgement All other product names or trademarks are properties of their respective owners. Rockchip is a registered trademark of Rockchip Electronics Co., Ltd. ⚫ Arm® and Cortex® are registered trademarks of Arm Limited (or its ⚫ subsidiaries) in the US and/or elsewhere Android™...
- Page 4 Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity RTC-710RK ⚫ 12V power adapter (power cord ordered separately) ⚫ If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
- Page 5 About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the product page at AAEON.com for the latest version of this document.
- Page 6 Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. Make sure the power source matches the power rating of the device. Position the power cord so that people cannot step on it.
- Page 7 Liquid intrusion to the device iii. Exposure to moisture Device is not working as expected or in a manner as described in this manual The device is dropped or damaged Any obvious signs of damage displayed on the device DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES (SEE CHAPTER 1) TO PREVENT DAMAGE.
- Page 8 FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Caution: There is a danger of explosion if the battery is incorrectly replaced.
- Page 9 China RoHS Requirements (CN) 产品中有毒有害物质或元素名称及含量 AAEON System QO4-381 Rev.A0 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯 醚(PBDE) (Pb) (Hg) (Cd) (Cr(VI)) (PBB) 印刷电路板 × ○ ○ ○ ○ ○ 及其电子组件 外部信号 × ○ ○ ○ ○ ○ 连接器及线材 ○ ○...
- Page 10 China RoHS Requirement (EN) Hazardous and Toxic Materials List AAEON System QO4-381 Rev.A0 Hazardous or Toxic Materials or Elements Component Name PCB and Components Wires & Connectors for Ext.Connections Chassis CPU & RAM HDD Drive LCD Module Optical Drive Touch Control Module Battery This form is prepared in compliance with the provisions of SJ/T 11364.
-
Page 11: Table Of Contents
Table of Contents Chapter 1 - Product Specifications ..................1 Specifications ......................2 Chapter 2 – Getting Started ....................6 Product Overview ....................7 Notes before use ....................11 Turning on the Device ..................12 Setting the Function Keys ..................13 Connecting to Ethernet.................. -
Page 12: Chapter 1 - Product Specifications
Chapter 1 Chapter 1 - Product Specifications... -
Page 13: Specifications
Specifications System Processor Rockchip RK3399K Processor (Quad-Core A53 1.6GHz & Dual-Core A72 2.0GHz) Operating System Android 8.1 Memory Onboard LPDDR4 2GB (Default) / 4GB Storage eMMC 16GB (Default) / 32GB Display 7" WXGA (1280x800) 700-nit / 300-nit TFT LCD I/O Port SIM card slot x 1 USB 3.2 Gen 1 Type-C x 1 Audio jack x 1 (3.5mm) - Page 14 System Expansion Slot M.2 slot x 1 Docking connector: USB 3.2 Gen 1 x 1 Barcode Scanner (Optional) 2D Barcode scanner, OPTICON MDI-4100-USB via I/O module (Optional) HF RFID (Optional) ISO 15693 (R/W) ISO 18092 (R/W) ISO 14443-A (R/W) ISO 14443-B (Only Read UID) Dependent on card type Physical Key F1 (Audio on/off)
- Page 15 Environmental Drop MIL-STD-810G Method 516.6 Procedure IV Drop Height: 122cm (48 inches) MIL-STD-810G Shock Air charge: +/- 8KV Contact charge: +/- 4KV UL62368-1 Certifications and Standards Power Supply AC/DC Adapter AC 100 ~ 240 V, 50 ~ 60 Hz, Output: 12V, 3.34A, Li-ion Battery 8-hour battery life based on test Battery Life configurations...
- Page 16 Touch Screen Touch Type 7" Projected Capacitive Multi-Touch Screen (700 nits with 10 points / 300 nits with 5 points) Min. 85% Light Transmission Chapter 1 – Product Specifications...
-
Page 17: Chapter 2 - Getting Started
Chapter 2 Chapter 2 – Getting Started... -
Page 18: Product Overview
Product Overview Front View Function Description Light Sensor Ambient Light Sensor 8MP Front Camera 8MP Front Camera HF RFID High-Frequency RFID Reader; supports 13.56MHz freq. Function Key x 5 Programable Function Keys: F1 (Audio on/off) F2 (Print Screen) F3 (Barcode Scanner Trigger) Volume Up, Volume Down Chapter 2 –... - Page 19 Side View (Bottom-Left) Function Description USB3.2 Gen 1 USB Type-C Nano SIM Card Slot Nano SIM card only Audio Jack 3.5 mm stereo headphone jack DC-in Jack Input: DC 12V Speaker Audio out speaker Docking Connector RTC-710RK connection for docking station Kensington Lock Device Lock Chapter 2 –...
- Page 20 Side View (Top-Right) Function Description USB2.0 Type A x 1 Micro-SD Card Slot microSD Card Slot Power Button (1) Power On or Shutdown Device (2) Enter Sleep Mode Chapter 2 – Getting Started...
- Page 21 Rear View Function Description Flash Rear Camera LED Flash 8MP Camera With LED Flash M.2 Slot For LTE module (Need to order LTE version) Battery Bay Hot-swappable Battery x 1 Optional I/O Module Optional I/O Module External Antenna for GPS GPS + GLONASS (Default), BeiDou (Optional) (Must order external GPS antenna version) Chapter 2 –...
-
Page 22: Notes Before Use
Notes before use Before using your device, please read through the following instructions Use only the power adapter that comes with your device. Using a different ⚫ power adapter may cause damage. The AC power cord is designed for the RTC-710RK only. ⚫... -
Page 23: Turning On The Device
Turning on the Device The power button turns your device on and off. Hold the button for one second to power on. To start or wake from sleep mode, hold the power button for 0.5 seconds until the shutdown confirmation is shown. If the system remains unresponsive, press and hold the power button to force power off (may result in data loss). -
Page 24: Setting The Function Keys
Setting the Function Keys This section details how you can set the programable Function Keys, F1 and F2. The default settings are listed in the Product Overview. To begin, launch the AAEON Hot Key App. In the main menu you will find the two programable keys. F1 is Hot Key 1 and F2 is Hot Key 2. - Page 25 Both keys can be set to one of three main functions: App, Web, and KeyCode. App allows you to set the hot key to launch any app that is installed on the device. Chapter 2 – Getting Started...
- Page 26 Web will allow you to set a URL, which will open in your default browser when the hot key is pressed. KeyCode will allow you to set the hot key to perform a specified action based on Android key codes. For a full list of Android KeyCodes, visit the Android developer website: https://developer.android.com/reference/android/view/KeyEvent Chapter 2 –...
-
Page 27: Connecting To Ethernet
Connecting to Ethernet To connect your RTC-710RK to an Ethernet cable, first access the Network & Internet menu in the system settings. Turn the Ethernet adapter on. Finally, reboot the device and connect the Ethernet cable. Chapter 2 – Getting Started... -
Page 28: Chapter 3 - Accessories
Chapter 3 Chapter 3 – Accessories... -
Page 29: Barcode Scanner
Barcode Scanner The barcode scanner accessory enables the RTC-710RK to read barcodes to perform various actions. Note: the barcode scanner does not ship with any software or SDKs. Perform the following test to check if the scanner is working: Open the Notepad application Scan a barcode If the scanner is working, the code will be entered as text into Notepad For detailed specifications and operating instructions, please refer to the bar code... -
Page 30: Chapter 4 - Frequently Asked Questions
Chapter 4 Chapter 4 – Frequently Asked Questions... -
Page 31: Frequently Asked Questions (Faq)
Frequently Asked Questions (FAQ) What is the default storage path for downloaded software? The default path is: sdcard/download. How do you disable the auto stand-by function? Select Settings-> Display-> Sleep-> Never. How to configure input methods? After installing the input app, select Settings-> System -> Language & Input-> Default->... - Page 32 How to change the home screen wallpaper? Select Settings-> Display-> Wallpaper-> Select the image file you wish to use as a wallpaper. How to remove shortcuts from the home screen? Long press the app shortcut until the Remove icon “X” appears at the top of the home screen.
-
Page 33: Appendix A - Statements
Appendix A Appendix A - Statements... -
Page 34: Statements
Statements Declarations and Safety Statements Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. - Page 35 The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
-
Page 36: Canadian Notice
A.2 Canadian Notice IC Regulations This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. -
Page 37: Safety Caution
A.3 Safety Caution Important Safety Instructions Power Safety Requirement Products with electrical current ratings up to 3A and weighs more than 1 Kg must use approved power cords greater than or equal to: VCTF, 3G or 0.75mm Basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bathtub, wash bowl, ⚫... -
Page 38: Battery Disposal
voisinage de la fuite Utiliser seulement le cordon d’alimentation et la batterie indiqués dans le manuel. ⚫ Ne pas jeter les batteries dans le feu. Elles pourraient exploser. Vérifier les dispositions locales de recyclage. A.4 Battery Disposal There is a risk of explosion if the battery is replaced by an incorrect type. -
Page 39: Battery Caution
A.5 Battery Caution There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Il y a un risque d’explosion si la batterie est remplacée par un autre type incorrect. Disposer de la batterie en accord avec les instructions. - Page 40 5. Charging Method If using a charging dock or accessory, please read the user manual for the charger before use and follow the recommended charging methods in that manual. 6. First Time Use If you are using a battery pack for the first time and notice rust, bad smell, or something abnormal (ex: inflated), DO NOT USE the battery pack.
-
Page 41: Adapter Caution
10. Do not use the battery pack if any part of it is protruding or inflated. Replace with a new battery pack immediately. 11. If the battery pack cannot be charged (won’t hold a charge, system is unable to charge it), replace the battery pack with a new one immediately. 12. -
Page 42: Fcc Interference Statement
A.7 FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 43: Regulatory Information And Disclaimers
IMPORTANT NOTE: Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. A.8 Regulatory Information and Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product.