Table of Contents
Advertisement
STORAGE AND DISPOSAL
STORAGE
If the circuit breaker is to be stored for any length
of time prior to installation, the following
precautions should be taken.
1. The original packing should be restored, if
possible.
2. Do not subject the equipment to moisture or
sunrays.
Store in cool, clean, and dry
location.
3. Place a dust cover over the contactor
packaging to protect against dirt and
moisture.
4. Store in an upright position.
INSPECTION DURING STORAGE
Routine scheduled inspection is necessary if
storage is for an extended period. The unit
should be checked for condensation, moisture,
corrosion, and vermin.
Prior to installation, the contactor should be
carefully examined for evidence of physical
damage, corrosion, or other deterioration. Refer
to the PRE-ENERGIZATION Section of this
manual.
The MAINTENANCE section of this manual
describes
various
recommended for this contactor during the
operation period.
DISPOSAL
Contact your state environmental agency for
details on disposal of electrical components and
packaging in your particular area.
types
of
inspections
Page 23
Advertisement
Table of Contents
