Download Print this page

Sealey HT111LED Quick Start Manual

Head torch 5w cob led auto sensor

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Instructions
1. SAFETY
1.1.
GENERAL
DO NOT shine directly into your, another person's or an animal's eyes.
8
DO NOT allow children to use the torch.
8
DO NOT use the torch if you suspect that the battery or the torch casing is damaged.
8
DO NOT leave batteries in torch in a discharged state. Before storage remove batteries.
8
BATTERY SAFETY
1.2.
WARNING! To reduce the risk of burns or fire:
DO NOT attempt to open the batteries.
8
DO NOT crush, puncture, short contacts or dispose of in fire or water.
8
DO NOT expose to temperatures above 60°C (140°F).
8
Replace only with the batteries designed for this product.
9
Recycle or dispose of used batteries as stipulated by local regulation.
9
If the electrolyte in the batteries gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with
9
cool water and seek immediate medical attention.
2. INTRODUCTION
Hands-free 5W COB LED spotlight with 40° angle adjustment. Dimmer switch allows brightness to be adjusted from 20% to 100%.
Main light has one switch with 4 functions, on, flash, auto-sensor and off. Hold down switch to enable auto sensor function which will
allow turning on/off just by waving hand in front. Rear of strap includes a red LED warning light which has 2 functions, flash or on, ideal
for a cycling light. Adjustable headband and foam brow for added comfort. Powered by 3 x AA batteries (not included).
3. SPECIFICATION
Model No: .............................................................HT111LED
LED Qty: .......................................................... 5W COB LED
Lumen output (High): ................................................... 350lm
Lumen output (Low): ...................................................... 80lm
Battery: ................................................. 3 x AA (not included)
Weight: ........................................................................... 170g
fig.1
© Jack Sealey Limited
HEAD TORCH 5W COB LED AUTO SENSOR
HT111LED
MODEL NO:
Original Language Version
HT111LED Issue 1 14/05/19

Advertisement

loading

Summary of Contents for Sealey HT111LED

  • Page 1 HT111LED MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.