Interfacing To The Rtt Through The Enervista 469 Setup Program - GE RTT Instruction Manual

THE 469 MOTOR MANAGEMENT RELAY
2.1.5

Interfacing to the RTT through the EnerVista 469 Setup Program

2.1.5.1 Current
16
The following information describes how to configure the SR469 relays and how to monitor
voltage and current inputs using the 469 Setup Software and the RTT.
Setup: Enter the Phase CT Primary, then press Save.
Metering: The current values measuerd by the relay can be viewed
on the following screen in real-time.
CHAPTER 2: USING THE RTT ON SR SERIES RELAYS
FIGURE 2–3: Current Setup
FIGURE 2–4: Current Metering
RTT DESKTOP TEST SET– INSTRUCTION MANUAL