Sealey SCSG08 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Wear eye
Refer to instruction
protection
manual
1. SAFETY
 Be aware of the safety requirements for the fluids contained in the vessel, and wear personal protective equipment appropriate to those fluids.
 Read and follow all the fluid manufacturers instructions for application and safe use.
Label vessel with chemical used, even if water. It is recommended that individual vessels should be used for individual chemicals. Cross

contamination can give unexpected results.
 DO NOT spray at people, animals or protected insect species.
 DO NOT spray in high winds, at naked flames or sources of heat.
 DO NOT use the pressure sprayer for any purpose other than for which it is designed.
 DO NOT use whilst eating, drinking, smoking; under the influence of drugs, alcohol, intoxicating medication, or if fatigued.
 DO NOT use to spray flammable liquids, solvents etc.
 DO NOT allow children to use the sprayer without supervision.
2. INTRODUCTION
Premium quality hand pump foam sprayer manufactured specifically for the generation of dry and long lasting foam. For use with chemical
agents with surfactant properties. Provides a dense and durable foam, ideal for cleaning and disinfecting upholstery and carpets, disinfecting
bathrooms and changing rooms, kitchens and food processing stations, car washes etc. Safety valve with depressurization option. Large 60mm
opening for easy refilling and reduced spillage. Translucent tank with level indicators. Supplied with three mixers which vary the ratio of air to
cleaning fluid in the foam generation. Robust composite construction with ergonomic pump and handle.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCSG08
Working Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.75ltr
Total Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5ltr
fig.1
4. OPERATION
4.1.
Grip the handle and rotate the vessel to separate (fig.1).
4.2. Fill to a maximum of 0.75ltr (observe the graduated scale moulded into the vessel).
4.3. Re-attach vessel keeping vertical, rotate until hand tight against neck seal. Pressurise unit by operating pressure pump handle until
the pressure relief valve starts to blow.
4.4. Press the trigger to spray.
4.5. The orientation of the spray fan pattern may be changed from vertical to horizontal by loosening the collar surrounding the nozzle,
moving the nozzle and re-tightening the collar.
4.6. After use, or before removing vessel, lift the pressure relief valve to vent the pressure.
© Jack Sealey Limited
INSTRUCTIONS FOR:
PREMIER PRESSURE INDUSTRIAL FOAM
SPRAYER
SCSG08
MODEL NO:
Wear a breathing Wear protective
mask clothing
Original Language Version
fig.2
SCSG08 Issue:1 - 09/07/17