Bosch PFS 3000-2 Original Instructions Manual page 27

Problem Cause
Container seal (15) not positioned or not cor-
rectly positioned in groove of suction tube (16)
Nozzle cap (10)/(11) loose
Air filter (31) heavily contaminated
Spray material too viscous
Spray material dripping at Deposit of spray material on the nozzle
the nozzle cap cap (10)/(11), the nozzle needle (14) and the
air cap (2)
Nozzle cap (10)/(11) loose
No spray material coming Sliding switch (25) is in position ◯
out of the nozzle cap
No pressure build-up in container (7) due to
container not being completely closed
Suction tube (16) loose
Nozzle needle (14) clogged
Suction tube (16) clogged
Ventilation hole (17) on suction tube (16)
clogged
Container seal (15) missing or damaged
Spray material too viscous
Spray material dirty (lumps of paint)
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
Corrective measure
Mount the container seal precisely all around in
the suction tube groove
Tighten the nozzle cap
Change air filter
Dilute the spray material again and carry out a
test-spray run
Clean the nozzle cap, nozzle needle and air cap
Tighten the nozzle cap
Set the sliding switch to "wood" or "wall" applic-
ation
Turn the container (7) towards the close sym-
bol until you hear the lock ring (6) engage
Slide the suction tube all the way onto the paint
channel (18)
Clean nozzle needle
Clean suction tube
Clean the suction tube and the ventilation hole
Slide a (new) container seal over the suction
tube into the groove
Dilute the spray material again and carry out a
test-spray run
Completely empty and clean the spray gun;
pour the spray material through the filling
sieve (12) when filling
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
Spray gun, electrical unit, accessories and packaging should
be sorted for environmentally friendly recycling.
Do not dispose of power tools along with
household waste.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.
Only for United Kingdom:
According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113), power tools that are no longer
usable must be collected separately and disposed of in an
environmentally friendly manner.
English | 27
1 609 92A 685 | (09.09.2021)