Download
Share
Print this page
Huawei MT992 Quick Start Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Modem
  5. MT992
  6. Quick start manual
Huawei MT992 Quick Start Manual

Huawei MT992 Quick Start Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
MT992 G.fast Modem Quick Start
1
Installation
Mounting Your MT992
Horizontal Mounting
Place the MT992 on a smooth surface with cool air and good ventilation. Keep the
MT992 at least 50 mm away from other objects.
Vertical Mounting
1. Mark the positions of two holes used for mounting the MT992, and ensure that
the two holes have the same spacing as the two mounting holes.
2. Select a proper drill according to the outer diameter of the screws. Use a hammer
drill to drill the marked positions on the wall. Then clean the wall and install two
expansion bolts.
3. Use a screwdriver to fasten the screws into the expansion bolts, leaving the heads
of the screws 3 mm over the wall. Then install the MT992 to the screws.
 Keep 50 mm clearance on all sides to ensure adequate ventilation.
 The figures in this guide are for reference only. The appearance and display
features may vary slightly depending on the actual product version.
31507676_03
1

Advertisement

loading

Related Manuals for Huawei MT992

Summary of Contents for Huawei MT992

  • Page 1 Installation Mounting Your MT992 Horizontal Mounting Place the MT992 on a smooth surface with cool air and good ventilation. Keep the MT992 at least 50 mm away from other objects. Vertical Mounting 1. Mark the positions of two holes used for mounting the MT992, and ensure that the two holes have the same spacing as the two mounting holes.

  • Page 2: Connecting Cables

    PHONE port c MODEM port It is recommended that during operation, the MT992 should be more than 1 m away from electronic devices that can generate 25 kHz to 106 MHz noise, such as microwave ovens and power line communication modems, and the distance between the DSL cables and Ethernet cables should be over 10 cm.

  • Page 3: Setting The Computer Ip Address

    A software update is in progress when all four indicators blink twice per second. Setting the Computer IP Address Before logging in to the MT992 web page, set the IP address of the computer that will be used for the login.

  • Page 4: Logging In To The Web Page

    Logging In to the Web Page The MT992 provides an intuitive web management page where you can view or set the MT992 parameters. 1. Open a browser. In the address box, enter 192.168.1.1. Press Enter. 2. Enter the login user name (!!Huawei by default) and password (@HuaweiHgw by default).
  • Page 5 Before connecting and disconnecting cables, stop using the device and disconnect  it from the power supply. Ensure that your hands are dry during operation. Place the device on a stable surface.  Keep the device away from electronic appliances that generate strong magnetic or ...
  • Page 6 Power adapter safety The power plug is intended to serve as a disconnect device.  For pluggable devices, the socket-outlet shall be installed near the devices and shall  be easily accessible. Unplug the power adapter from electrical outlets and the device when not in use. ...
  • Page 7 EU regulatory conformance Statement Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of the following Directives: RoHS Directive 2011/65/EU ...
  • Page 8 THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.