Note
For more information on
connecting an antenna,
see the tuner Owner's
Manual.
Note
To use the TV remote
control to operate the
tuner, see page 35. For
more information on using
the tuner, see the Owner's
Manual that came with it.
14
Setting Up the TV
Connecting an ATSC/NTSC Tuner
Follow these instructions to connect an ATSC/NTSC tuner to your TV.
1
Turn off and unplug your TV and tuner.
2
Slide the RESOLUTION SELECT switch on the back of the tuner to 1080i.
3
Connect your antenna cable to the ANT. IN jack on the tuner.
4
Connect one end of a component video cable to the Y (green), PB (blue), and PR (red)
connectors on the back of the TV, as shown below. Be sure to match the colors of the
cables to the colors of the connectors.
ATSC/NTSC tuner
Antenna cable
5
Connect the other end of the cable to the Y, PB, and PR connectors on the tuner.
6
Connect one end of a standard audio cable (with red/white connectors) to the
L–Audio–R connectors on the back of the TV.
7
Connect the other end of the cable to the R and L Audio Out connectors on the tuner.
Audio cable
Component video
cable
RESOLUTION
SELECT
Set to 1080i