Table of Contents
Advertisement
Installation
Contact your dealer about the compatible monitor models.
WARNING:
- Before installing or removing this product, disconnect the monitor power cord from the power outlet.
- Pay careful attention not to insert foreign objects into the monitor while installing this product. Also, use
care not to drop this product and the expansion slot cover.
CAUTION
Ensure the Option Board is securely fastened using the original screws to prevent the Option Board from falling out of the monitor. A falling Option Board
may expose you to danger.
Models ME431 / ME501 / ME551 / ME651
Replace the option cover.
1. Remove the slot covers (1) and (2) and option cover (a). (Figure 1)
2. Fasten the option cover (b), included with the monitor, with the
removed screws. (Figure 2)
(Recommended Fasten Force: 60.8 - 82.4N
NOTE: Do not apply a force exceeding the specified torque when tightening the screws.
Otherwise, the screw holes may be damaged.
3. Insert the option board along the rail and fasten it with the removed
screws. (Figure 3)
(Recommended Fasten Force: 60.8 - 82.4N
NOTE: When installing this product, ensure that the top side is facing the rear of the
monitor (see figure 3). This product can be damaged if inserted in the wrong
orientation.
Do not apply a force exceeding the specified torque when tightening the screws.
Otherwise, the screw holes may be damaged.
cm).
•
cm).
•
English-5
1
(a)
2
(b)
3
(1)
(2)
Advertisement
Table of Contents
