Panasonic WJ-HDE300 Conversion Manual page 11

WJ-HDE300 S-ATA conversion guide
(32) Connect the S-ATA cables to the HDDs as shown right.
Make sure that the connectors have been inserted com-
pletely.
(33) Replace the SW label on the front chassis with a new one
as shown right.
(34) Fix the metal plate with six screws in the reverse order of
the removal.
(35) Install the top cover on the main unit with 11 screws.
Panasonic System Solutions
for HDD2
S-ATA cable
(Gray)
for HDD1
S-ATA cable
(Red)
SW label
10
Maintenance guide
for HDD3
S-ATA cable
(Red)
Metal plate
HDE300_SATAConversionGuide_B
for HDD4
S-ATA cable
(Gray)