Specification And Application Areas For Contractors 31; Application Areas - AEG DDLE LCD 18 Operating And Installation Instructions

Hook the device cap at the top and pivot it down onto the back panel, then make it audibly click into place.
5. Specification and application areas
5.1 Specification
(The details on the type plate apply)
Type
Rated output
Rated current
Fuses
Selectable output
Pressure drop *
with DMB
without DMB
Throughput limit (DMB)
Nominal capacity
Type
Rated operating pressure
Weight
Protection class to EN 60335
Protection level to EN 60529
Test symbols
Building Regulation test
certificate [Germany]
Water connection
Power supply
Bare wire heating system
Cold water inlet temperature
Application area
Throughput "ON"
Table 3
5.2

Application areas

Details as
Resistance
Conductivity
Conductivity
Table 4
noise emissions has been issued for the instantaneous water heater series
DDLE Basis 18 DDLE Basis 18/21/24
kW 18
A 26.0
A 25
no
MPa (bar) / l/min 0.08 (0.8) / 5.2
MPa (bar) / l/min 0.06 (0.6) / 5.2
l/min 8.0
Colour white
0.4 l
sealed/unvented
1 MPa (10 bar)
3.6 kg
1
IP 25
see type plate
PA-IX xxxx/I applied for
G ½" (male thread)
3/PE ~ 400 V - 50/60 Hz
900 cm (see Table 4)
max. 25 °C
water with low lime-scale levels and those with lime-scale content
 3.0 l/min
application ranges for different reference temperatures
standard details
at 15 °C
cm  900
 111
mS/m
1110
µS/cm
for contractors
with selectable output
18 21
28.5 30.3
32 32
yes yes
0.08 (0.8) / 5.2 0.1 (1.0) / 6.0
0.06 (0.6) / 5.2 0.08 (0.8) / 6.0
8.0 8.0
white white
at 20 °C at 25 °C
800 735
125 136
1250 1360
For contractors
DDLE Basis 27
24 27
34.6 39
35 40
yes no
0.13 (1.3) / 6.9 0.16 (1.6) / 7.7
0.10 (1.0) / 6.9 0.12 (1.2) / 7.7
9.0 9.0
orange orange
AEG
DIN 4109
PA-IX xxxx/I
31