Bosch GRL 240 HV Operating/Safety Instructions Manual page 21

only using identical replacement parts. This will ensure that the functionality
of the remote control is maintained.
presence of flammable liquids, gases or dusts. Sparks can be created in the
remote control which may ignite the dust or fumes.
of the rotational laser.
Inserting/Replacing the Battery
Using alkali-manganese batteries is recom-
mended for operation of the remote control.
To open the battery lid 8A, press the latch 9A in
the direction of the arrow and remove the battery
lid. Insert the battery provided.
Remote control
Working range
Operating temperature
Storage temperature
Battery
Weight according to
EPTA-Procedure 01/2003
1) The working range can be decreased by unfavorable environmental conditions (e.g. direct sun
irradiation).
Please observe the article number on the type plate of your remote control.
The trade names of individual remote controls may vary.
For clear identification of your remote control, see the serial number
1.800.561.8187
RC1 General Safety Rules
Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RC1 Intended Use
The remote control is intended for controlling rotational laser levels
in indoor and outdoor use.
RC1 Preparation
RC1 Technical Data
1)
www.
When inserting, pay attention to the correct
polarity according to the representation on
the inside of the battery compartment.
control when not using it for longer
periods. When storing for longer periods, the
battery can corrode and discharge itself.
1 x 1.5 V LR06 (AA)
on the type plate.
10A
-21-
information@itm.com
.com
RC1
100 ft (30 m)
–10 °C ~ +50 °C
–20 °C ~ +70 °C
2.4 oz. (69 g)