Advertisement
4. Stream
1.
Once the StreamSmart Aplet starts, you will see the message,
"Waiting for connection...," then data should automatically start
streaming. Your data stream may differ from that shown below.
Move the sensor around and notice how the readings vary.
2.
Press the STOP menu key. You have now collected your first data set.
The data stream is a graphical representation of sensor data. The
horizontal axis represents time in seconds, and the vertical axis
represents sensor data in appropriate units (in this case, lux). The
plot window displays a number of items, as illustrated in Figure 1-3
below. Note that no setup is necessary; most settings are done
automatically.
Basically, the streaming application works similarly for the 39/40gs
models and the 50g calculators, with only minor differences in how
you access the functions. For example, in Figure 1-3, to access the
HP StreamSmart 410 Quick Start Guide
Figure 1-3
3
Advertisement
