Installing Bbu In Server - NEC N8103-93 User Manual

28

1-4. Installing BBU in Server

Install the BBU in the server in the following procedure:
1.
Remove the additional slot cover and screw of an unused PCI slot.
2.
Insert the BBU into the PCI slot and fix the BBU with the screw removed above.
3.
Connect the battery cable to the battery connector on the disk array controller.
Screw
Notice
4.
Install the side cover on the server and insert the power cords to the receptacles
to recover the original state.
Battery cable
To install the BBU in the server, an empty PCI slot is required in the server.
Before the installation, make sure that at least an unused PCI slot remains
in the server.
BBU
Disk array controller
Battery connector