Smart Connect - Sony Xperia T LT30p User Manual

photos from the comfort of your couch. You can also use this feature to listen to
music from your phone via the TV's speakers.
Your TV must support screen mirroring for the functionality described above to work. If your
TV does not support screen mirroring, you need to purchase a wireless display adapter
separately.
When using screen mirroring, the image quality may sometimes be negatively impacted if there
is interference from other WLAN networks.
To mirror the screen of your device on a TV screen
1 Follow the instructions in the User guide for your TV to turn on the screen
mirroring function.
2 From your Home screen, tap
3 Find and tap Settings > Xperia™ > Screen mirroring.
4 Tap Turn on Screen mirroring and select a device.
When using screen mirroring, do not cover the WLAN antenna area of your device.

Smart Connect

About Smart Connect
Use the Smart Connect application to set what happens in your device when you
connect or disconnect an accessory. You can also use it to set a specific action or a
group of actions to launch on your device at certain times of the day.
For example, when you connect your headset or headphones, you can set an event
so that the following actions are launched on your device:
• Between 7am and 9am, when you commute to work, the WALKMAN player starts,
and the web browser opens the morning paper. The ring volume is set to vibrate.
• Between office hours, a conference call app opens on your device.
• On the way back from work, the FM radio starts, and a notes app with your shopping
list opens.
To start the Smart Connect application
1 From your Home screen, tap
2
Find and tap Smart Connect.
To create a Smart Connect event
1 Start the Smart Connection application. If you are opening Smart Connect for
the first time, tap OK to close the introduction screen.
2 On the Events tab, tap
3 Give the event a name, then tap Create.
4 Under When, add either an accessory or a time interval, or both.
5 Under Do this, add what you want to happen in your device.
6 Under At the end, add what you want to happen when you disconnect the
accessory or when the time interval comes to an end. If both these conditions
are set, the actions start either when you disconnect the accessory, or when
the time interval comes to an end.
7 To save the event, press
To add a Bluetooth™ accessory, you have to first pair it with your device.
To edit a Smart Connect event
1 Start the Smart Connection application.
2 On the Events tab, tap an event.
3
If the event is switched off, tap
4 Adjust the settings as desired.
5 To save the event, press
To delete an incorrect entry, touch and hold the entry and then tap Delete.
This is an Internet version of this publication. © Print only for private use.
.
.
.
.
.
.
91