Switching The Video Source - Pioneer AVH-P7490DVD Owner's Manual

Switching the Video Source

7 Switching to RGB
You can watch videos from the AV-Receiver. Usually set the video source to RGB.
• Switch to RGB.
Repeat the preceding operation to switch to the previous video source.
Note:
• If you select the "AVM" video select setting in the display setting menu, video is locked to
RGB. (See page 130.)
7 Switching to AV and VCR
You can switch between video from a component connected to the DVD player's
video input (VCR) and video from the built-in DVD player or component connected
to AV-BUS input (AV).
Note:
• When switched to AV, you can watch video from the AV-BUS component selected with the
AV Receiver's source select.
• Select the desired video source in following order:
AV = VCR
Note:
• If you select the "AVM" video select setting in the display setting menu, video is locked to
RGB. (See page 130.)
26