Page 1
Always there to help you Register your product and get support at www.philips.com/welcome Question? Question? Contact Contact HTD3510G Philips Philips User manual...
Contents 7 Product specifications 1 Important Safety Care for your product 8 Troubleshooting Care of the environment 9 Notice 2 Your home theater Copyright Main unit Trademarks Remote control Connectors 10 Language code 3 Connect and set up Connect speakers Connect to TV Connect audio from TV and other devices Set up speakers...
1 Important wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper Read and understand all instructions before you wall mounting that results in accident, use your home theater.
Keep out of reach of children and Please visit www.recycle.philips.com for contact the manufacturer. additional information on a recycling center in your area. This is CLASS II apparatus with double insulation, and no protective earth provided.
Load Pause theater Mute Congratulations on your purchase, and Remote control welcome to Philips! To fully benefit from the support that Philips offers, register your home This section includes an overview of the theater at www.philips.com/welcome. remote control. Main unit...
(Standby-On) k SURR • Switch the home theater on or to Select surround sound or stereo sound. standby. (Play/Pause) • When EasyLink is enabled, press Start, pause or resume play. and hold for at least three seconds to switch all connected HDMI CEC (Stop) compliant devices to standby.
3 Connect and set b MIC Audio input from a microphone. c AUDIO IN Audio input from an MP3 player (3.5mm jack). This section helps you connect your home Back connectors theater to a TV and other devices, and then set it up.
Place the rear surround speakers to the left and right side of your seating position, either in line with it or slightly behind it. SUBWOOFER (subwoofer): FRONT FRONT FRONT WOOFER LEFT RIGHT CENTER Place the subwoofer at least one meter to the left or right of the TV.
Page 10
• HDMI-CEC is a feature that enables TV and the home theater. (see 'Set CEC compliant devices that are up EasyLink (HDMI-CEC control)' on connected through HDMI to be page 10) controlled by a single remote control, If you cannot hear the TV audio through such as volume control for both the your home theater, set up the audio TV and the home theater.
When you watch videos, switch your TV to Option 2: Connect audio through the correct video input. For details, see the analog audio cables TV user manual. Basic quality audio Connect audio from TV and AUDIO IN- AUX other devices Play audio from TV or other devices through your home theater speakers.
For information on your device, see the user manual of the device. control): If system audio control is enabled, • Philips does not guarantee 100% interoperability with the audio of the connected device is all HDMI-CEC devices. output through your home theater...
4 Use your home Select [Video], and then press OK. Select [HDMI Setup] > [EasyLink Setup] theater > [Sys Audio Control] > [On]. • To play the audio from the TV speakers, select [Off], and skip the following steps. This section helps you use the home theater to Select [HDMI Setup] >...
Play buttons Note • Picture and sound can be synchronized through the Button Action setup menu, press (Home), select [Setup] > [Audio] > [Audio Sync]. Navigation Navigate menus. buttons Confirm an entry. (Play/ Start, pause or resume play. Display menu for VCD and SVCD Pause) Display the content menu on VCD and SVCD Stop play.
USB storage devices Note • Make sure that the subtitle file has the exact same Enjoy pictures, audio, and video stored on a name as the video file. For example, if the video file is named 'movie.avi', name the subtitle file as 'movie.srt' USB storage device such as an MP4 player.
Press the Navigation buttons buttons and Musical slideshow OK to select and change: • [Info]: Display the play information. If the picture and audio files are from the same [PBC]: Enable or disable the content • disc or USB storage device, you can create a menu navigation of VCD and SVCD musical slideshow.
Using the 3.5mm stereo audio cable, Play buttons connect the MP3 player to the AUDIO IN Button Action connector on your home theater. Select a preset radio station. • If you use 6.5mm stereo audio cable, connect the MP3 player to your Alphanumeric home theater using a 3.5mm - 6.5mm buttons...
[Karaoke Idol]: Have a Karaoke [Stereo]: Two-channel stereo sound. • • contest with your friends. Follow the Ideal for listening to music. on-screen instructions to start the contest. Note [Key Shift]: Change the pitch to match • • your voice. If the audio source is a 2.1 channel.
5 Change settings Note • If your preferred disc language is not available, select [Others] from the list, and enter the 4-digit language code found at the end of this user manual (see The home theater settings are already 'Language code' on page 25). configured for optimal performance.
Lock disc Audio settings Press (Home). Press (Home). Select [Setup] and then press OK. Select [Setup] and then press OK. Select [General] and then press OK. Select [Audio] and then press OK. [Disc Lock]: Lock the disc to restrict • [HDMI Audio]: Set the HDMI audio •...
Caution • Do not install a lower version of software than the current version installed on your product. Philips is not liable for problems caused due to software downgrade. Check software version Check the version of the current software installed on your home theater.
7 Product Step 1: Download the latest software specifications Connect a USB flash drive to your computer. In your web browser, go to www.philips. com/support. At the Philips Support website, find your Note product and locate the Software and drivers.
Page 23
• Signal-to-noise ratio: > 65 dB (CCIR) / • Latin America/Asia Pacific: 110-240V~, (A-weighted) 50-60 Hz • Input sensitivity: • Power consumption: 50 W • AUX: 2 V • Standby power consumption: ≤ 0.5 W • AUDIO IN: 1 V •...
If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support. Main unit The buttons on the home theater do not work.
Page 25
• Make sure that the home theater is input. Distorted sound or echo. connected to a Philips brand EasyLink TV, and the EasyLink option is turned on (see • If you play audio from the TV through the 'Set up EasyLink (HDMI-CEC control)' on home theater, make sure that the TV is page 10).
9 Notice registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. This section contains the legal and trademark notices. The terms HDMI and HDMI High-Definition Copyright Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI...
10 Language code Inupiaq 7375 Pushto 8083 Abkhazian 6566 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 Íslenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto-Romance 8277 Arabic 6582 Ivrit 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486...
Page 28
11 Index language language code amplifier audio main unit predefined modes overview specifications specifications audio options troubleshooting media formats care connector product connectors front connectors control options disc play picture overview main unit main unit remote control discs audio options picture control buttons options...
Page 29
safety use of the product sound predefined sound mode surround sound synchronize picture and sound troubleshooting sound mode speakers specifications surround sound subwoofer specifications synchronize picture and sound time search titles trademarks troubleshooting connection main unit picture play sound tuning grid format USB storage device options...
Page 30
For any sales or service related queries: Visit us on web at www.philips.com/support or Call us on Tel No. 1860-180-1111 1800-102-2929 “standard call rates apply” Email: customercare.india@philips.com...