Table of Contents
Advertisement
Restore default settings
1
Press
(Home).
2
Select [Setup] and then press OK.
3
Select [Preferences] > [Default], and then
press OK.
4
Follow the onscreen message to restore
default setting.
» Your home theater is reset to its
default settings, except for password,
parental control and disc lock settings.
6 Update software
Philips continually tries to improve its products.
To get the best features and support, update
your home theater with the latest software.
Compare the version of your current
software with the latest version on
www.philips.com/support. If the current version
is lower than the latest version available on the
Philips support website, upgrade your home
theater with the latest software.
Caution
•
Do not install a lower version of software than the
current version installed on your product. Philips is not
liable for problems caused due to software downgrade.
Check software version
Check the version of the current software
installed on your home theater.
1
Press
(Home).
2
Select [Setup] and then press OK.
3
Select [Preferences] > [Version Info].
» The software version is displayed.
Update software through
USB
What you need
•
A USB flash drive that is FAT or NTFS-
formatted, with at least 75MB of memory.
Do not use a USB hard drive.
•
A computer with Internet access.
•
An archive utility that supports the ZIP file
format.
EN
19
Advertisement
Table of Contents
